yes, this one is very practical
The last giveaway in the first half of 2022 | FC series LED grow light
- Thread starter Mars Hydro Led
- Start date
seems this one is very pricy. is it worthwhile?
thanks, bro. this is something we can consider.
yes it is , and if you make it less pricy , you will sell a lot of .
i don't think we will sell that. we want the FCE to be the main light but not TS, lol.2nd
Mars, you guys should sell extension cables to your bars, i want to set mine from the fce around all sides of the tsw to get more coverage and power and i cant
@aliceklar did you post your entries?
#marshydrosummersale
Peace
two weeks left. i think it is not hard. invite your friends to join in us.
Thanks Mars hydro for the contest ,
i have try the fce 4800 with bibi40 and would like too win one !
an opening rear of the tent ( like the side openings ) will be perfect for accessing all the plants without move them .
@JamalBarro join us
#marshydrosummersale
i have try the fce 4800 with bibi40 and would like too win one !
an opening rear of the tent ( like the side openings ) will be perfect for accessing all the plants without move them .
@JamalBarro join us
#marshydrosummersale
2nd try
inverse the zips of the sides opening ( from up to down will be better I thought for opening for aeration )
@Gypsy Nirvana
#marshydrosummersale
inverse the zips of the sides opening ( from up to down will be better I thought for opening for aeration )
@Gypsy Nirvana
#marshydrosummersale
i think it is more likely a rocket. haha
Anyway, good idea.
there ya go the "rocket" LED vertical grow light.i think it is more likely a rocket. haha
Ca++
Well-known member
If a series of lights use the same ratio of LEDs, then you could re-calibrate a 10$ light meter to read PPFD. Numerically they over read, so the sensor just needs a resistor over it I guess.
Once prototyped you could order a few from the manufacturer to your spec. Swapping the parts during production wouldn't even be retooling I reckon.
Then someone could buy one of the better lights, and get a ppdf meter for 20$. You would find it's close enough for other light series. Mostly probably, the range buttons function could be a series button. Again, no retool. Just a different component fed in is quite possibly all that is needed. Then labeling.
Once prototyped you could order a few from the manufacturer to your spec. Swapping the parts during production wouldn't even be retooling I reckon.
Then someone could buy one of the better lights, and get a ppdf meter for 20$. You would find it's close enough for other light series. Mostly probably, the range buttons function could be a series button. Again, no retool. Just a different component fed in is quite possibly all that is needed. Then labeling.
1: tents could use a semi rigid flap (!) going around behind the zip, overlapping about an inch. I couldn’t find a photo. 
2: this would stop any annoying pinprick light leaks, and stop the zipper getting stuck on the fabric
3: @JustSumTomatoes are you in for this one
4: #marshydrosummersale
2: this would stop any annoying pinprick light leaks, and stop the zipper getting stuck on the fabric
3: @JustSumTomatoes are you in for this one
4: #marshydrosummersale
1: insulated driver option for people who grow in outbuildings/garages where mounting outside the tent can cause condensation in the unit
2: no picture I’m afraid
3: @armedoldhippy are you still out there
4: #marshydrosummersale
2: no picture I’m afraid
3: @armedoldhippy are you still out there
4: #marshydrosummersale
entry # 3
fan blades. most fans have plastic blades.
after 5-6 months the fins flatten and fan does
not blow as much air. so i would like to see
some fans with metal fan blades.
no photo sorry.
@AlwaysLearning
#marshydrosummersale
fan blades. most fans have plastic blades.
after 5-6 months the fins flatten and fan does
not blow as much air. so i would like to see
some fans with metal fan blades.
no photo sorry.
@AlwaysLearning
#marshydrosummersale
Now that could be made a bit smaller and then called called Mars "Dildo"! Add vibration and C2C coindrop integration, and you're golden! Steady base is a must!
Last edited:
My older MH 1x1x1.8 m tent doesnt have those. But my newer MH 1.5x1.5x2 tent is exactly how you say.1: tents could use a semi rigid flap (!) going around behind the zip, overlapping about an inch. I couldn’t find a photo.
2: this would stop any annoying pinprick light leaks, and stop the zipper getting stuck on the fabric
3: @JustSumTomatoes are you in for this one
4: #marshydrosummersale
Sorry, edited to add: It's not on the inside, it's on the outside! I didn't read your post well enaugh at start, but basically does same job!
Last edited:
Sounds like an idea.
Today is the bonus time.
On sunday(Father's day), there are only two entries. @mr.brunch @Lrus007. You two guys are the lucky one to get the small gift. Do you need heat mat or grow bags? PM your country, i will help check the stock firstly. 
On sunday(Father's day), there are only two entries. @mr.brunch @Lrus007. You two guys are the lucky one to get the small gift. Do you need heat mat or grow bags? PM your country, i will help check the stock firstly. 
