It pulls through the scrubber and blows out the top of the fan, The gap it has is enough probly just enough but its enough for it to function!
It pulls through the scrubber and blows out the top of the fan, The gap it has is enough probly just enough but its enough for it to function!
It works like this I have a 40 amp double pole breaker installed to the main. I ran 10 gauge wire from the 40 amp breaker on the main panel to the 40amp 120v intermatic timer board outside the growroom, I ran another 10 gauge wire from the timer to a junction box, From the junction box I wired up 2 outlets using 12 gauge wiring, Each with its own line ran from the outlet to the junction. I run 1 1k light on each outlet and on one of the outlets I also run a co2 regulator. For the AC + Dehumidifier I installed a 20 amp breaker at the main and ran a line over using 12 gauge and hooked it up to an outlet for the ac and dehumidifier. Then installed another 20 amp outlet using 12 gauge for the 2 light movers the air purifier plus the fan! Thats how the electrical was done.
I believe he wires up the 1ks to 2 timers, each run from a 40amp circuit. Here is a quote from his other grow...
He only had 2 1kws in that grow so I assume he just ran another 40amp to another timer for the additional 2. Peep his picture from the first page...
Thats how it looks to me.