ganja_guru
Member
Would it be safe to say a 600w e pap is effective for a 10 sqft area? With multiple lights for overlap. Eg. 850sqft rm would need 85 600w epaps.
GG
GG
Would it be safe to say a 600w e pap is effective for a 10 sqft area? With multiple lights for overlap. Eg. 850sqft rm would need 85 600w epaps.
GG
According to my calculations for the price of 50 1000w, I can get 77 600w for the same price. Not sure if the 1000w come in 347v, but I know the 600's do, if so it will take 122 less amps to run 77 600's at 347v compared to 50 1000's at 240v. Correct me if I'm wrong but can't find anything stating otherwise on your website.
prices are a written quote by a canadian distribute for 1000+ units.
Cheers GG.
So in your opinion I would be better off with 1000? even with a 10' ceiling with 4-5 foot plants sitting 1 foot off the ground. not including the container another 16". So top of plant would be 7' and the fixture is hung at 10' only giving me 2'-3' head space between the canopy and bulb. that why I was leaning towards 600's.
thanks.
cheers GG
What about clearance above the light? Is there minimums?I think you're better of with 1000W definatey.
3ft between lamp and plant is what we advise.
Good luck with the ePaps!
What about clearance above the light? Is there minimums?
What about clearance above the light? Is there minimums?
Good question.
DGS you have another means that we can communicate? Email?
Cheers GG
Looking to set up a 25ft x 25ft room with 11ft ceiling with 20 E-Papillons do you recommend 4ft centers from light to light?
Thanks
Damn! That AC/DE might actually be worth the scratch...
Did they happen to state what bulbs/ballasts were used in combination with the Sunlight reflectors?