mr. durden
Member
slick on both accounts! what size cooler did you use?
Dibdabs
got the mesh off of Ebay ...
http://www.ebay.com/sch/items/?_nkw...udhi=&_sop=12&_fpos=&_fspt=1&_sadis=&LH_CAds=
dibdabs, take the pic from the other side. you should need a cga510 to male like this
http://www.ebay.com/itm/Model-WD212...246?pt=LH_DefaultDomain_0&hash=item20d1ac923e
just pull a vac on your 50lb tank and then transfer from the tank with butane to the mastercool. chilling the receiving one and heating slightly the other will help transfer.
I picked up the left handed propane nut at an RV supply and adapted it with a 1/4" FNPT to 1/4" Male flare fitting from RSD refrigeration supply, so that we can use refrigeration hoses.
it should just screw into the fitting on the other side of the pics you posted
Seems complicated when you can just run with no heat.
Sent from my GT-N7100 using Tapatalk 2
Which in turn makes a better quality product, I agree. Although it takes a lot longer and more work after it comes out of the pot.. What are your cold run times like durden? Also Ill get back with you on the cooler size...