007grow
Member
Been a long time member here and lurker before that. it dawned on me i should share this system I recently built through some trial and error. Testing of my concept on a smaller scale first 2ft x 12ft and expanding it to its current implementation 4x12 with some lessons learned which i will share now.
This all started because i wanted to run hydro and have a pretty foolproof system i could leave for longer periods of time 7-14 days. i started with each plant in an individual bag with invidual feed lines. chased all the issues with drippers and clogs tried different filter setups and tbh nothing worked long term using any poly line or dripper (i tried 5 different ones). I then went to the raised beds running the same sog density and tested different feeding solutions until i came upon this so far no clog feed system.
to supply the table I have a veg area that I take/make clones, veg in 3" and then 6" pots to a height of around 18" that runs flood and drain
I will share that setup in an alternate thread here 3 tier flood and drain
current table build
covers a 4ft x 12ft
4 - 480w quantum boards lm301h ir uv 660nm covering this area
6 - 2x4 fabric raised beds filled with perlite
1 - adjustable interval timer
1 - ecoplus585 convertible bottom draw pump
1 - pvc manifold (build pics and explanation below)
1 - rain gutter
2 - end caps
2 - cheapo poly roof panels for sheds 12ft x ~32"
1 - 38gallon tote (can use a bigger one and run it under the table if you adjust the table height so that gutter clears)
1 - frame (build pics and explanation below)
Frame parts list
until i can update with all the exact measurements ill describe it is a sloped table 6" higher on one end drains into a rain holes drilled in middle that drain into 38gal rez
built from
2x4 12ft
1x2
1x6
mount rez
mount rain gutter (caulk ends and complete mounting surface)
attach roof panel (caulk heavily at base mount)
position and fill raised beds
Pump manifold parts list
1 - fem garden hose to 3/4"
1 - male garden hose to 3/4"
6 - 90 elbows
2 - 3 way (T)
1 - 4 way (X)
1 - 3/4" ball valve
5 - 10ft 3/4" PVC
assemble and drill feed holes
this run and last run i ran sog 8 plants per 2x4 bed. bubba x dosido
timer was set to water for 45 seconds on 5 mins off (current run 20 off)
nutrient line
supernatural bloom aqua
canna pk13/14
supernatural bud blaster
gh silicate
molasses even though I run dead rez. Dont know if it works or not, but this is my old recipe and you let me know how you think it turned out.
i run dead rez using a solution i make from a pool chemical
last 10 days i stopped adding any nutes and let them use up what was left until my ppms dropped to about 200-300 then i flushed the medium and rez and refilled with ro water.
any questions feel free i will be updating with pics/video of both plants and system
This all started because i wanted to run hydro and have a pretty foolproof system i could leave for longer periods of time 7-14 days. i started with each plant in an individual bag with invidual feed lines. chased all the issues with drippers and clogs tried different filter setups and tbh nothing worked long term using any poly line or dripper (i tried 5 different ones). I then went to the raised beds running the same sog density and tested different feeding solutions until i came upon this so far no clog feed system.
to supply the table I have a veg area that I take/make clones, veg in 3" and then 6" pots to a height of around 18" that runs flood and drain
I will share that setup in an alternate thread here 3 tier flood and drain
current table build
covers a 4ft x 12ft
4 - 480w quantum boards lm301h ir uv 660nm covering this area
6 - 2x4 fabric raised beds filled with perlite
1 - adjustable interval timer
1 - ecoplus585 convertible bottom draw pump
1 - pvc manifold (build pics and explanation below)
1 - rain gutter
2 - end caps
2 - cheapo poly roof panels for sheds 12ft x ~32"
1 - 38gallon tote (can use a bigger one and run it under the table if you adjust the table height so that gutter clears)
1 - frame (build pics and explanation below)
Frame parts list
until i can update with all the exact measurements ill describe it is a sloped table 6" higher on one end drains into a rain holes drilled in middle that drain into 38gal rez
built from
2x4 12ft
1x2
1x6
mount rez
mount rain gutter (caulk ends and complete mounting surface)
attach roof panel (caulk heavily at base mount)
position and fill raised beds
Pump manifold parts list
1 - fem garden hose to 3/4"
1 - male garden hose to 3/4"
6 - 90 elbows
2 - 3 way (T)
1 - 4 way (X)
1 - 3/4" ball valve
5 - 10ft 3/4" PVC
assemble and drill feed holes
this run and last run i ran sog 8 plants per 2x4 bed. bubba x dosido
timer was set to water for 45 seconds on 5 mins off (current run 20 off)
nutrient line
supernatural bloom aqua
canna pk13/14
supernatural bud blaster
gh silicate
molasses even though I run dead rez. Dont know if it works or not, but this is my old recipe and you let me know how you think it turned out.
i run dead rez using a solution i make from a pool chemical
last 10 days i stopped adding any nutes and let them use up what was left until my ppms dropped to about 200-300 then i flushed the medium and rez and refilled with ro water.
any questions feel free i will be updating with pics/video of both plants and system
Last edited: