high everyone, thought maybe it was time for me to
post up a proper thread and as i don't have a 'grow'
going right now i figured maybe i could share how i
built myself a little cloning factory.
first i'd like to say thanks to Burnt Rope and his fine
cloning thread without which this box wouldn't exist!
it was his thread on the simplest cloning method i'd
ever seen that changed my whole way of doing clones
as before i discovered his thread i'd been using a bubble
cloner, and with excellent results i might add getting near
100%.
anyway, here is the link to his thread and if you read
the thread and follow just a few simple instructions,
you will have success, guaranteed!
World class cloner new at walmart
i'd also like to thank Melkor420 for his starting the PL-L
club and all the folks who have contributed to that
excellent thread as well. . .
PLL Club. (if you don't know, now you know)
anyway, once i decided to truly commit to these cloners
i decided to build a home for them so my cloning op would
be housed in it's own little condo.
here are a couple pics of the start of the process and,
as you can see, i started with a basic 2 door 'dormroom'
cupboard that was 35 1/2 inchs high, 30 inchs wide and
16 inchs deep before i began my modifications.
as you can see, pretty standard issue. ...actually, i got
this at a local job lot store for $30.00 so i figured it'd do
the job nicely.
i'd also like to say that i am no carpenter, i'm just a stoner
who had a need and found my own way to fill it, inspired
though i certainly was by many fine threads here at ICMag.
so if you are a skilled woodworker please don't hurt
yourself laughing at my fumbling attempts at 'joinery',
lol.
also, i'll be posting a lot of pics for this in an attempt
to give a 3-d look at my solutions in hopes of inspiring
future noobs to just do it!
when faced with a choice of doing it yourself or doing
without, i say just freeken do it! (just count your fingers
when you're done, lol)
peace, SOG
post up a proper thread and as i don't have a 'grow'
going right now i figured maybe i could share how i
built myself a little cloning factory.
first i'd like to say thanks to Burnt Rope and his fine
cloning thread without which this box wouldn't exist!
it was his thread on the simplest cloning method i'd
ever seen that changed my whole way of doing clones
as before i discovered his thread i'd been using a bubble
cloner, and with excellent results i might add getting near
100%.
anyway, here is the link to his thread and if you read
the thread and follow just a few simple instructions,
you will have success, guaranteed!
World class cloner new at walmart
i'd also like to thank Melkor420 for his starting the PL-L
club and all the folks who have contributed to that
excellent thread as well. . .
PLL Club. (if you don't know, now you know)
anyway, once i decided to truly commit to these cloners
i decided to build a home for them so my cloning op would
be housed in it's own little condo.
here are a couple pics of the start of the process and,
as you can see, i started with a basic 2 door 'dormroom'
cupboard that was 35 1/2 inchs high, 30 inchs wide and
16 inchs deep before i began my modifications.
as you can see, pretty standard issue. ...actually, i got
this at a local job lot store for $30.00 so i figured it'd do
the job nicely.
i'd also like to say that i am no carpenter, i'm just a stoner
who had a need and found my own way to fill it, inspired
though i certainly was by many fine threads here at ICMag.
so if you are a skilled woodworker please don't hurt
yourself laughing at my fumbling attempts at 'joinery',
lol.
also, i'll be posting a lot of pics for this in an attempt
to give a 3-d look at my solutions in hopes of inspiring
future noobs to just do it!
when faced with a choice of doing it yourself or doing
without, i say just freeken do it! (just count your fingers
when you're done, lol)
peace, SOG