phatpharmer
Member
Hi guy's im starting this thread a bit late but better late than never I guess they say lol Im built 2 tables 4x8 following the medman method as close as I could. Im currently on day 4 of flower so im going to give you the quick version of wat I did and wat iv used to date so I can get you guys up to my present day lol
First thing I did was figured out what size I wanted my tables and what materials I would need to build them which is made very easy by medman in his thread here on Ic and and his videos on you tube. So after that I went to home depot bought
6-2"x6"
2-2"x4"
4 sheets of 4x8 plywood
deck screws
100ft roll of vapour barrier 5ml thick
caulking
4 3/4" drill saw bit
staples
That's basically everything I needed everything else I had on hand to make this quicker ill post pics of what I did and if you have any question please feel free to ask so here's some pics of the build in these pics it just showing the framing the holes cut out and the tables lined with the vapour barrier
First thing I did was figured out what size I wanted my tables and what materials I would need to build them which is made very easy by medman in his thread here on Ic and and his videos on you tube. So after that I went to home depot bought
6-2"x6"
2-2"x4"
4 sheets of 4x8 plywood
deck screws
100ft roll of vapour barrier 5ml thick
caulking
4 3/4" drill saw bit
staples
That's basically everything I needed everything else I had on hand to make this quicker ill post pics of what I did and if you have any question please feel free to ask so here's some pics of the build in these pics it just showing the framing the holes cut out and the tables lined with the vapour barrier