Looks like aphids but it's the leaf right?
Yeah, it's definitely not an actual bug, it looks like the leaf is oozing it out, or possibly some bug is depositing something there.
Looks like aphids but it's the leaf right?
Those Marconi's are pretty good. Real long red heirloom sweet peppers. Just don't kiss it.
I get those on my peppers too man. Think it's heat bumps from too warm rootzone.
I only usually get it on my potted peppers when we have 100f+ weather.
I'm randomly browsing ICMag, check out MBFerts and boom. $200 8 inch HO maxfan 940CFM. I can't seem to find it on CanFan's website. It must be new... Most retailers have it closer to $300.
My 8" HO are less cfm than that, those must be a new model.
Yeah in hindsight, I was a bit too high and excited... I mean yeah it's more CFM, but I already have 4 inlines... 2 6" HO, 1 8inch HO, and a 8" MAXFAN. The MAXFAN is the quietest... technically... It's also the whiniest, high pitched, and in the immediate vicinity, the loudest of them all. I guess on the outside of a building it is probably the quietest. High frequencies don't penetrate nearly as well as low frequencies.
I'm randomly browsing ICMag, check out MBFerts and boom. $200 8 inch HO maxfan 940CFM. I can't seem to find it on CanFan's website. It must be new... Most retailers have it closer to $300.
I'm wondering about their hormone booster as well...
Not sure about the fans, but MBFerts are some good people. Tom is a straight shooter (which I like).
Which products have you used, and how did you like them?
I had already bought CC nutes elsewhere before finding him, but I bought like $5k worth of equipment from him. In turn, he gave me a bottle of hormones for free, but I haven't used it yet. I've ran into a LOT of delays getting the rooms up and running. I think I am pretty close now; a year later (at least $20k total, sitting... waiting... wasting... ).
I want to get the opinion of some people knowledgeable on the subject of fire safety. I currently have all of my own circuits run with a sub panel and proper over current limiting, as well as using T-104's for flipping ballasts on and off.
There is currently no arc-fault protection, or GFCI. All of my electrical is ran high up off the floor. I have some #12 that is not in conduit run along the roof, as well as ballasts mounted to the walls and ceiling, or sitting on stands a few feet off the ground.
I obviously am looking to install Arc-Fault protection as well as GFCI. I am also looking to install armored conduit to protect the currently exposed wiring.
With these protections in place, how important is a fire proof box for my ballasts? Just a few days ago I read about Bobblehead's fire and it scared the shit out of me. Has me rethinking everything about the new room build.
The next question I'm looking to answer is about fire ratings. How important is it to build a room within the current structure with 20 minute fire ratings? My current home is a complete wood structure. There is NO DRYWALL ANYWHERE.
If all of the above precautions are taken into account, how important would it be to build an enclosed room within the home itself? What sort of fire rating does 2x4's and 6x6's have? Does lining the roof and ceiling with Orca create a serious issue should a fire break out? I also want to line the floor with Vinyl billboard tarp or EDPM pond liner.
I feel like if I install AFCI, GFCI, armored conduit, and a ballast box, there is little chance of a fire breaking out. I guess a bulb could explode, but this is incredibly rare, and I'm not sure it would start a fire unless there was some sort of kindling around...
Assuming I do build a room within a room, where would be the best place to install automatic fire extinguishers? Inside the room, or outside? The room I intend to build the new room inside of has A Frame ceilings so installing fire extinguishers above the new room would not be an issue.
Sorry for the haphazard post. I've got a lot of ideas floating around, and am working on a budget, so I would like to be as safe as possible, without cutting corners, but also not going overboard with expenses.
I didn't see this about bobbles fire, can you point me there?
Pulled the Strawberry Diesel this AM. ~9.5 weeks. I got a couple pics of 1 full plant, the smallest one.. It was the only one I could get down in one piece, lmao... I'm gonna pull the DTB tray in a couple days. Harvest pics to come...