GH FloraDuo Grow (sample) (6-0-6) (NH4)1.9% (NO3)4.1% Ca2.6% Fe.18% B.007% Co.0005% Cu.002% Mn.01% Mo.0015% Zn.003%
538g/473mL = 1.1374g/mL
@10mL/Gal
N 180
P 0
K 150
Mg 0
Ca 78
S NOT LISTED
Fe 5.40
B 0.21
Co 0.015
Cu 0.060
Mn 0.30
Mo 0.045
Zn 0.090
Derived from: Calcium Nitrate, Ammonium Nitrate, Potassium Nitrate, Potassium Borate, Cobalt Sulfate, Copper Nitrate, Ammonium Molybdate, Zinc Nitrate, Diethylenetriaminepentaacetic Acid, Ethylenediamine-bis(2hydroxyphenyl)acetic Acid, Ethylenediaminetetraacetic Acid, Urea.
GH FloraDuo Bloom (sample) (0-4-2) Mg1.4% Fe.15% S1.6% B.008% Co.0005% Cu.002% Mn.008% Mo.0015% Zn.003%
538g/473mL = 1.1374g/mL
@10mL/Gal
N 0
P 52
K 50
Mg 42
Ca 0
S 48
Fe 4.5
B 0.240
Co 0.015
Cu 0.060
Mn 0.240
Mo 0.045
Zn 0.090
Derived from: Potassium Phosphate, Magnesium Sulfate, Potassium Borate, Cobalt Sulfate, Copper Sulfate, Sodium Molybdate, Zinc Sulfate, Diethylenetriaminepentaacetic Acid, Ethylenediamine-bis(2hydroxyphenyl)acetic Acid, Ethylenediaminetetraacetic Acid.
Looks like they are dropping the P levels vs. Flora 3 part. Ive never seen DTPA, EDTA, or EDDHA listed as 'acid' before. Mfg normally list which elements (Fe for example) the chelating agents are attached too.