What's new
  • Happy Birthday ICMag! Been 20 years since Gypsy Nirvana created the forum! We are celebrating with a 4/20 Giveaway and by launching a new Patreon tier called "420club". You can read more here.
  • Important notice: ICMag's T.O.U. has been updated. Please review it here. For your convenience, it is also available in the main forum menu, under 'Quick Links"!

Yayyy! My first colloidal silver generator (photo)

Adze

Member
hello all,thanks for all the info. read some of the tread but i still need to know if you can smoke the female plant that you sprayed with the silver??? thanks for your help and have a buzzed day, peace and God bless

People drink colloidal silver until their skin turns blue. It's supposed to be a medication. I seriously doubt the tiny amount left in or on the plant will come close to the dose these folks are taking... :biggrin:
 

noreason

Natural born Grower
ICMag Donor
Veteran
People drink colloidal silver until their skin turns blue. It's supposed to be a medication. I seriously doubt the tiny amount left in or on the plant will come close to the dose these folks are taking... :biggrin:

You're right but you're going to burn that silver and inale it, little different than drink it, isn't it?
 

drum_halfzware

New member
My local store has some colloidal silver spray that is 150 ppm

is that to strong or will it be ok to use ?

A strategy to use the 150 ppm colloidal silver (cs) solution is:

1) obtain distilled water (dH2O), a volumetric flask to accurately measure cs and dH20, and a spray bottle.
2) measure 4 parts dH2O and 1 part cs.
3) combine 150 ppm cs and dH2O in the spray bottle.
ex. 100 ml of 150 ppm cs + 400 dH2O = 500 ml of 30 ppm cs

This produces a soultion of cs which is in the desired dose-response range and allows the 150 ppm cs to be more efficiently. The 150 ppm cs can be used as future stock solution from which to generate more experimental 30 ppm cs.
 

drum_halfzware

New member
150 ppm cs as stock solution

150 ppm cs as stock solution

A strategy to use the 150 ppm colloidal silver (cs) solution is:

1) obtain distilled water (dH2O), a volumetric flask to accurately measure cs and dH20, and a spray bottle.
2) measure 4 parts dH2O and 1 part 150 ppm cs.
3) combine 150 ppm cs and dH2O in the spray bottle.
ex. 100 ml of 150 ppm cs + 400 dH2O = 500 ml of 30 ppm cs

This produces a soultion of cs which is in the desired dose-response range and allows the 150 ppm cs to be utilized more efficiently. The 150 ppm cs can be used as future stock solution from which to generate more experimental 30 ppm cs.
 

High Country

Give me a Kenworth truck, an 18 speed box and I'll
Veteran
A strategy to use the 150 ppm colloidal silver (cs) solution is:

1) obtain distilled water (dH2O), a volumetric flask to accurately measure cs and dH20, and a spray bottle.
2) measure 4 parts dH2O and 1 part 150 ppm cs.
3) combine 150 ppm cs and dH2O in the spray bottle.
ex. 100 ml of 150 ppm cs + 400 dH2O = 500 ml of 30 ppm cs

This produces a soultion of cs which is in the desired dose-response range and allows the 150 ppm cs to be utilized more efficiently. The 150 ppm cs can be used as future stock solution from which to generate more experimental 30 ppm cs.

I never checked ppm or anything like that....just used a commercial CS generator....sprayed....plant reversed....pollinate clone of itself....seeds produced....job done....feminised seed.
 

Buddaluva

Member
So having c.s throat spray that is 30 ppm is not the same as making your own c.s with 30 ppm

I was looking on ebay for .999 silver and decided to go with the .999 silver wire to just make it my self but its 13 bucks but i can get a bottle of c.s throat spray that is 30 ppm for less

If its both the same then it seems just simpler to use the throat spray

Are they the same ? just the throat spray is already made up opposed to making it up yourself ?
 

jump117

Well-known member
Veteran
Are they the same ? just the throat spray is already made up opposed to making it up yourself ?
Hey Buddaluva!
They may be the same and they may be different, in other words it may be a fake.
It happens, as was reported here several times and also in other CS forums.

You may test the solution, if it is true CS or not by adding some kitchen salt.
This simple test described in post #960 on page 64 of this forum
https://www.icmag.com/ic/showpost.php?p=4715495&postcount=960

I never checked ppm or anything like that....
Hey High Country!
Sorry that you did not use the TDS meter, it would be very interesting to know at what ppm you get your good results.

:)
 
hello all,i went to a coin store and bought 2 liberty dimes made in the 1930:s or so i think. all silver in those dimes.!! $3-4 each,alergater clips at the dollor store and 9 volt's there to .this is the second time makeing seeds this way and i have a few more to do later on.have a buzzed day i know i am !!! peace and God bless.
 

drum_halfzware

New member
I never checked ppm or anything like that....just used a commercial CS generator....sprayed....plant reversed....pollinate clone of itself....seeds produced....job done....feminised seed.


Making colloidal silver is simple. I used a meter to get the concentration to 40 ppm during cs generation. This concentration is in the middle of the linear part of the dose response curve,30-50 ppm, and is efficacious. It is difficult, but one can generate higher concentrations of cs and use it as a stock solution with which to dilute in order to achieve desired concentration.
 

Buddaluva

Member
I was watching some vids on making c.s and they were using 3 and 4 9v batteries together

Can you use just 1 9v battery or do you have to hook 3 or 4 of them together ?

Thanks in advance fellas
 
i use only 1 at a time but when thats dead i use another untel i get a big patch of it, floating on top of the jar filled with distilled water then strain through panty hose.i make a few batches per plant and keep sparying untel balls show or untel banana come out of the bud sight of the plant.
 

Buddaluva

Member
Thanks buzz

Im thinking about just getting one of those re chargeable 9v batteries so i wont have to keep buying them lol

I wired up my alligator clips to the 9v battery snap last night i even put it to my tongue afterwards to make sure the strength was still their and yup it sure was my tongue got a good shock lol

i have 2 6" .999 silver wires to use so im good to go

ready to make my first fem beans yippie
 

Attachments

  • Co2Generator.jpg
    Co2Generator.jpg
    47.9 KB · Views: 13
i would do hole plant because you can't smoke the weed they said when silver is in it.I used rechargable 9 volts to. have a buzzed day,i know i will,peace and God bless.
 

High Country

Give me a Kenworth truck, an 18 speed box and I'll
Veteran
Will it work on a single branch to get fem beans or do you have to spray the entire plant ?

Just soak the whole freaking plant in the shit and wait for a total reversal. Spray multiple times. Just wing it....that's all I did and it worked. Have to work out things by yourself sometimes.
 

jump117

Well-known member
Veteran
Will it work on a single branch to get fem beans or do you have to spray the entire plant ?
Yes, it will work on a single branch to get fem pollen.

You can process all the plant, but this is not necessary.

Untreated branches remain completely feminine.

They can be pollinated by outside pollen and get regular or feminized seeds, depending on the type of pollen.
 

Buddaluva

Member
4 1/2 hours and nothing is happening :(

their are very little small looking bubbles that has formed on the .999 silver but nothing else

Do i need more then 1 9v battery ?
 

Attachments

  • DSC00792.jpg
    DSC00792.jpg
    38.9 KB · Views: 11
Top