What's new

Skunkburner's 6kW Grow

FatBlunt420

Killin' Zombies!
ICMag Donor
Veteran
Sorry for the lack of updates, the battery in my camera isn't holding a charge anymore. Anyone got a suggestion for a decent digital camera around $100?

... i lost my camera charger, found one on ebay that came w a new battery for under 10$.
 

yerboyblue

Member
That virgin 200amp panel got me a little aroused. Looked like mine when I moved in, but its looking pretty ugly now.
 
S

skunkburner

After a long break, back to the show.

Starting off with an overview of everything:
picture.php


Side One - Tresdog in the front, Tahoe OG second, Purple Urkle third, with a Diablo OG and unknown Chem variety at the back.
picture.php


Side Two - All Chem D
picture.php
 
S

skunkburner

Added an RO filter to my setup:
picture.php


30 Gallon Nutrient Tanks:
picture.php


8" Max Fan pulling all the hot A/C exhaust air out of the lung room, I have a CF66 filter for this once things start to get dank in the grow room:
picture.php
 

d3cryption

Active member
Veteran
what size pots are those? 5 gals pots of coco? you cant go wrong with that chemD I'm subbed...

edit: them Mag ballasts aren't causing a heat problem for you?
 
T

TREE KING

nice thread im locked in. cant wait to see how that chem d and tre dawg turn out
 

LyryC

Active member
ICMag Donor
Veteran
Beautiful set up man! Very clean and professional. Lots of room for budsicles! :lurk:

With you all the way!
 

o2much4me

New member
Interesting. Thanks for the pics. Are you in a area where vented hoods are not needed? Hows the temps running. Like your work-
 
S

skunkburner

Answering a couple questions:

The pot sizes are the 7 gallon fabric square pots. Though they're full of crap with that 7 gallon number, each pot fits 50 liters, which is around 13 gallons.

The magnetic ballasts are most certainly putting out a decent amount of heat, I just don't have anywhere else to put them. Just going to have to plonk in a large enough A/C system to cope.

I don't use vented hoods, the glass cuts light and the bulbs need to heat up to work at 100% efficiency. I prefer to just cool down the whole room with A/C.

The room runs a liquid propane CO2 burner that's set for a low of 800 ppm and a high of 1100 ppm. Temperatures start off at around 80F and slowly climb over the night to around 85F on a night that's decently cool, or closer to 88F on a warmer night. Though that's becoming less of an occurrence now that's it's getting further on into Fall. Humidity is pretty much always under 55%, it drops rapidly once the CO2 burner comes on. Most of the time it's in the 40% area.

The sticky traps don't have anything on them, and hopefully they'll stay that way. But in the past they have worked to pull in unwanted "guests" in the way I have positioned them. I find that anything buzzing, creeping, crawling, or flying ends up attracted to the yellow contrast and whatever is put into the sticky glue.

I forget what pyrethrin foggers I used, just grabbed the ones they had at the local grow shop.

I think I managed to answer every question, hit me up again if I missed anyone. Thanks everyone for following the grow, can't wait until I can flip the room to flower and have something more impressive to show.
 

Latest posts

Latest posts

Top