I was hoping to do some experimenting with that sort of stuff. I'll be getting a freshwater one. What size is your tank, Aero?
Aeroponic PC case scrog
- Thread starter Aerohead
- Start date
Chr0nicles
Member
Some questions...
Some questions...
Aero, I'm almost done planning my micro box out (not sure if it's going in my PC case, or an old bass amp cab that I have in the basement...) and I have just a couple questions about your aero setup...I just can't picture in my head how you have the tubing rigged up in the cracker boxes? Could you draw me a ghetto sketch real quick as to the details in how all the tubing and sprayers are rigged up? I would REALLY appreciate this! Also, since I might have the room, I'm thinking of using a 70-150 watt HPS if I go the bass amp route, which is most likely since the size is like two and a half pc cases next to each other...anybody have experience as to how much heat these typically produce (microRU maybe? ;o)? I'll be able to rig up a "cool tube" kind of set up and cool it with PC fans, right? I'd LOVE to fit a 150 in there and really get things flowering!
It's actually cheaper for me to grab a small HPS than it is to buy the Workhorse flouro ballast and rig it up with 3 x 55w's like you have have! Although I also thought about copying your lighting setup and doubling it for a total of 6 of those flouros in there! However, that's REALLY pushing my budget and I'm looking for cheap here on my first run here...anyhow, thanks a million again and I can't wait to see more pictures here from you!!! ;o) You are SUPER inspiring man! 
- Chr0nicles
Some questions...
Aero, I'm almost done planning my micro box out (not sure if it's going in my PC case, or an old bass amp cab that I have in the basement...) and I have just a couple questions about your aero setup...I just can't picture in my head how you have the tubing rigged up in the cracker boxes? Could you draw me a ghetto sketch real quick as to the details in how all the tubing and sprayers are rigged up? I would REALLY appreciate this! Also, since I might have the room, I'm thinking of using a 70-150 watt HPS if I go the bass amp route, which is most likely since the size is like two and a half pc cases next to each other...anybody have experience as to how much heat these typically produce (microRU maybe? ;o)? I'll be able to rig up a "cool tube" kind of set up and cool it with PC fans, right? I'd LOVE to fit a 150 in there and really get things flowering!
It's actually cheaper for me to grab a small HPS than it is to buy the Workhorse flouro ballast and rig it up with 3 x 55w's like you have have! Although I also thought about copying your lighting setup and doubling it for a total of 6 of those flouros in there! However, that's REALLY pushing my budget and I'm looking for cheap here on my first run here...anyhow, thanks a million again and I can't wait to see more pictures here from you!!! ;o) You are SUPER inspiring man! - Chr0nicles
Chr0nicles, I'm not much of an artist so I'll try to get some pictures of how I ran the sprayers. I'll try to describe it first and see if it helps. Where the cracker boxes sit end to end, there is a T fitting. So we have 3 ends on the T, one end goes into each cracker box, and the third end points down to the sump. The fittings I used are sold at Home depot and are made for installing R/O systems. These fittings use O rings and can be connected and removed as many times as you like. I use Rainbird spray jets and drill them out to 1/16" and install them into the plastic tubing. To seal off the ends of the sprayers, I heat them up and crimp them with pliers. I use the 1/4" fittings and lines.
As far as lighting goes, I have run 150w HPS in small cabs before and they are much harder to cool than 165w of CFL. I don't think HID lighting is the way to go unless you have a tall cab like 3' or so. Working with 24" or less, I would try 2X70w HPS if you are going that route. Micro RU would be the one to seek advice from regarding HID's in small spaces his talents are impressive.
As far as lighting goes, I have run 150w HPS in small cabs before and they are much harder to cool than 165w of CFL. I don't think HID lighting is the way to go unless you have a tall cab like 3' or so. Working with 24" or less, I would try 2X70w HPS if you are going that route. Micro RU would be the one to seek advice from regarding HID's in small spaces his talents are impressive.
basscadet
Member
that looks so great man, seriously!
ArcticBlast
ArcticBlast
That lighter pic especially is so epic 
Do you do anything fancy for the flush or just water?
Do you do anything fancy for the flush or just water?
Nice growing dude, I only just found this thread.. read through it and was going to make a couple of suggestions, but as the thread went on you've made various tweaks to improve things anyhow!
hot dammm they looken super dooper great. they have a nice color.
I put a little molasses in R/O water for the flush.
Aero, mind telling me where you got your light fixture (The black thing) did you wire it yourself and if you did was it hard? i.e am i going to be able to do it with very little elec experience without killing myself?
I got it from my local fish store for $60 I think, it's 2X18w HO and works great for rooting clones. It's made by Current USA and can be found online for cheaper than I paid at the store. T5's are pretty easy to wire I see no reason you couldn't build your own. The PL-L's are even easier to wire because all of the wires are on the same side rather than t5's being wired from each end.
Thanks McSnappler, yes this forum has been very helpful, many here have been a great help especially since this is my first scrog. This grow would not have gone as well without this excellent forum.
I decided to begin flush today so I changed out my res with plain R/O water, ran it for a couple hours and changed it out again with R/O water a 2 tsp of molasses. The nice thing about flushing with molasses is that I can flush an extra week if my timing is off. The plan now is to flush 2 weeks and see what they look like.
C
cork144
looks so good mate, shame i cant give you anymore rep ffs lol!
will be nice to see them finish, see the fruits from your labour.
they look ready for the flush for sure, im sure it wont take much more over 14 days.
ITS THE FINAL COUNTDOWN!!!
will be nice to see them finish, see the fruits from your labour.
they look ready for the flush for sure, im sure it wont take much more over 14 days.
ITS THE FINAL COUNTDOWN!!!
Yes, looks like I made it, thanks for sticking around for the whole show, and the good advice as well.
It's now time to begin modding the aero case for the next run.
The sump will be rebuilt to a 3 gallon capacity and a higher pressure water pump will be added. I found this cool little radiator powered by a 120mm PC fan that will hopefully keep the sump to ambient room temps. It has run a little warmer than I would like for this run and a 5F drop should be a big help.
T
theratings
nice buds in that little case, i love micro grows! happy smoking.
T
texsativa
Great set up. I've really taken some ideas from your grow that I'll implement. I'd like to discuss this further but your PM is disabled. Cheers anyhow.
Latest posts
-
-
-
-
Ulu's Growstorys V3.5 | 0.5m² 170w | diverse Strains und Kreuzungen- Latest: Der Kommissar
Latest posts
-
-
-
-
Ulu's Growstorys V3.5 | 0.5m² 170w | diverse Strains und Kreuzungen
- Latest: Der Kommissar
