mr. durden
Member
good point prune.
i just built a Ia and never touch my IIIa's anymore.
i just built a Ia and never touch my IIIa's anymore.
I thought the MK2 can process 1-2 pounds. On the website it said:
"With the 24″ column in place, it holds about 240 grams of material, which provides an average production rate of about 80 grams per hour plus raw essential oil extract."
If that's true what column am I supposed to get to run 1 pound of material through an MK2?
good point prune.
i just built a Ia and never touch my IIIa's anymore.
Thanks! There's a store in my area that sells the G-5's so I will purchase 2 of those.
Like Regis pointed out, people like you who find these threads "confusing" and "difficult" should not be requesting from people who can read to assemble what is essentially a list of parts for a bomb.
Here is another thread your neighbors are going to regret that you didn't read:
https://www.icmag.com/ic/showthread.php?t=266761
There comes a point where helpful begets culpability, folks...
The 3 x 36" tube on the BHOgart holds between 3 to 400 grams depending on
your starting material and how tight you pack it.
Tom gives you everything you need to run it minus the Appion (only need 1) and
the vac pump (needed to pump out the system before the run) and a
vac chamber to purge your product.
If you get one, make sure to get atleast the 10" x 12" recovery pot. The 6x6 is way
too small imho.
Does the 3 x 36" tube come with the $1400 model? I will be picking your brain on this since you seem to know what's up. So do I need to tell the company that I want the 10" x 12" recovery pot instead of the smaller one that it comes with? Or does it not come with a recovery pot?
if kcar is only getting 300-400g in a 3x36 tube, then there is something wrong as we got 2.4lbs of ground and sifted material that was lightly packed.
i actually just packed another tube and got 2.6lbs just a moment ago. it seems with the size of the tube that you can't really pack hard, which i never did before. i just use an inch and a half dowel to tamp it down and fill in lifts like you.
i was of the same mind regarding grinding, but i think it is a myth that carried over from hash making. plus, we sift our material and pre clean so that there are no stems, wire stems, etc.
well, the first tube i ran was about 20%, but that was not what what we were expecting. actually, our first two tubes both averaged that. the next time we ran tubes, it was with some stuff from the same batch we had already run before and averaged around 10%.
we'd run 3 or 4 tubes a day, but we need another 1.9 first to handle the capacity. that is why i am so shocked that people want a 5lb system.
Tamisium is the only unit that can process in all temperature and is the only unit that doesnt require vacuum pumps, dry ice, David is the pioneer on BHO extractors
I f you want to settle for less quality, then go with some other.
yes they are pricey, But the quality is way above every one else
along with the safety concern!