Colloidal Silver aka: Silver suspended in water
Is nothing new and has been used for over a hundred years for various purposes.
Silver in itself is an impeccable sterilizing metal that is very precious..
My focus is using this metal in a wire form to create an electrode of both - and +
to submerse in a pure water free from dissolved solids and break the silver down into
the smallest particles possible.
We are in essence trying to penetrate the plant's epidermal layer and deliver the silver
particles to the cellular level to interfere with the ethylene production.
This done to a female staminate plant will create a full reversal when all goes well and
the results are viable pollen that will donate all the DNA and RNA that her lineage has
to offer,be it good or bad.
This is simply not going to create an exact clone or duplicate of the gal that is reversed any more than hitting her with pollen from a male sibling from her generation.
I want to make that clear ...
I will be using 14 gauge wire pharmaceutical silver that is 99.5% pure silver.
This is in my opinion the ideal configuration and quality to use for this application.
I will be using pure RO water, nothing else (no sodium ever!)
Distilled water is also ideal,,but the emphasis has to be water that is pure and without and dissolved solids.
The power supply needs to be no higher than 800 ma for best results and an ideal voltage is under 9 volts, I like 6 to 7.5 the best.
My Old radioshack DC power supply has been going strong for 10 years.
An airstone was used by me initially as it is proven that an elevated dissolved oxygen
level in the water during electrolysis of the silver anodes allows a more efficient process and this a smaller particle.
Remember this is paramount! the smaller the silver particle the better it will work!
lower voltage also allows a slower less erratic erosion of the silver wire and yet again smaller particles,rather than a larger amount of electricity and a larger flake.
The Airstone incorporated into the CS process is Essential !! Mandatory and needed!!! I hope I made that clear!
The airstone needs to be placed in the container (preferably glass) prior to starting
the process.
I usually only make enough to treat 1 small plant at a time and don't use any that is
beyond 30 days old.
This is why the crap they sell at GNC for example is not going to work..
1st it's made properly and 2nd CS has a shelf life.
Here is what my wires look like ...
Nothing fancy just 7" lengths attached to the DC power leads..
Is nothing new and has been used for over a hundred years for various purposes.
Silver in itself is an impeccable sterilizing metal that is very precious..
My focus is using this metal in a wire form to create an electrode of both - and +
to submerse in a pure water free from dissolved solids and break the silver down into
the smallest particles possible.
We are in essence trying to penetrate the plant's epidermal layer and deliver the silver
particles to the cellular level to interfere with the ethylene production.
This done to a female staminate plant will create a full reversal when all goes well and
the results are viable pollen that will donate all the DNA and RNA that her lineage has
to offer,be it good or bad.
This is simply not going to create an exact clone or duplicate of the gal that is reversed any more than hitting her with pollen from a male sibling from her generation.
I want to make that clear ...
I will be using 14 gauge wire pharmaceutical silver that is 99.5% pure silver.
This is in my opinion the ideal configuration and quality to use for this application.
I will be using pure RO water, nothing else (no sodium ever!)
Distilled water is also ideal,,but the emphasis has to be water that is pure and without and dissolved solids.
The power supply needs to be no higher than 800 ma for best results and an ideal voltage is under 9 volts, I like 6 to 7.5 the best.
My Old radioshack DC power supply has been going strong for 10 years.
An airstone was used by me initially as it is proven that an elevated dissolved oxygen
level in the water during electrolysis of the silver anodes allows a more efficient process and this a smaller particle.
Remember this is paramount! the smaller the silver particle the better it will work!
lower voltage also allows a slower less erratic erosion of the silver wire and yet again smaller particles,rather than a larger amount of electricity and a larger flake.
The Airstone incorporated into the CS process is Essential !! Mandatory and needed!!! I hope I made that clear!
The airstone needs to be placed in the container (preferably glass) prior to starting
the process.
I usually only make enough to treat 1 small plant at a time and don't use any that is
beyond 30 days old.
This is why the crap they sell at GNC for example is not going to work..
1st it's made properly and 2nd CS has a shelf life.
Here is what my wires look like ...
Nothing fancy just 7" lengths attached to the DC power leads..
Attachments
Last edited: