How viable is it to fraction THC, CBD, terpenes from a given flower/concentrate, then mix them all together?
THC and CBD are not easy to separate with fractional distillation.
The terpene fraction is not pleasant after fractionation.
How viable is it to fraction THC, CBD, terpenes from a given flower/concentrate, then mix them all together?
Where did all the terps go, bro?
THC and CBD are not easy to separate with fractional distillation.
The terpene fraction is not pleasant after fractionation.
A well made cannabis distillate will have very little terpenes.
A6Grower, i've got a few questions for you id like to ask outside of this thread is there a way to reach you, i dont see a private message feature on this board...for collecting terps youd use a differnt method(its here somewhere), also youd extract the terps from fresh material and then you would extract your cannabinoids with whatever solvent your using and do a distillation. THEN you would add those terps your collected first for an AWESOME POTENT product.
The Guild is somehow very effectively pulling off the terpenes intact during their process, they add them back in, and at Chalice, even had a terpene mister system around the canopy of their vendor tent reining holy fog.
Did they say how?
I've seen good usable monoterpene extraction results with steam extraction, but not from shortpath.
I've seen lots of people claiming to be consultants of this process to make The Clear or more specifically Thc distillate and let me tell you that it's a pretty penny to have a person walking you through. I heard of one business place charging $4000 for a 1 day class!
Real science was never a low budget thing and never will be. You need to learn the chemical and physical properties
of everything involved if you plan on doing it right. There's some serious Chemistry and Laboratory work involved if
anyone plans on getting pharmaceutical grade products from naturals source materials.
Good Luck.
Can you make clear w pho made from bbq propane or will the smell not be removed?
Can you make clear w pho made from bbq propane or will the smell not be removed?
run the propane through a alu-silica gel molecular sieve and you can remove the ethyl mercaptan.
http://analytical360.com/m/concentrates/527820
Ive been making awesome distillates, i only put grease on my cow and receiving flasks. No grease or anything on the boiling flask and spd head. Ive been using a robinair 3cfm vac pump and usually pull down to ~1000 microns once reaction starts happening. The pump will pull down to 500 before reaction starts taking place. No vac regulator, just a digital cps vac gauge. Just let the pump pull full speed the whole time. Ihave an RV8 about to be rebuilt. We'll see how much better that will be. Personally i dont thin the edwards 30 is nessecary. Also this is all done using the hot and fast method. My main fraction is usually in the 225 range, and usually takes me about 45 minutes to yield 400ml of distillate.