What's new

Off the shelf retail store screw-in LED and CFL bulb comparisons

igrowone

Well-known member
Veteran
Indeed the first crops I grew ceiling from standard Mexican bag seed. Some were truly special.

What I'm wondering is if by being pollinated in the second week of flower made them finish faster than if they went without being pollinated. As if the plant figured her job was done and got to finishing in about the time it takes for seeds to mature. (Actually a pretty wide window in my experience but see seeds bulging out of sacks in this case)

it wouldn't surprise me that pollinating shortens maturity
but have no specific info
there's a DJ Short quote out there about he preferred seeded bud for smoking
my own more limited experience agrees with this, seeded bud isn't stronger but it can be nicer
 

SoCoCrow

Member
Speaking of popping covers off, I've found that a clamp or vice is the ticket. Just squeeze the globe until it's pulled away from the ceramic heat sink a little and then twist the base. I use a hand squeeze Irwin clamp.
 
Indeed the first crops I grew ceiling from standard Mexican bag seed. Some were truly special.

What I'm wondering is if by being pollinated in the second week of flower made them finish faster than if they went without being pollinated. As if the plant figured her job was done and got to finishing in about the time it takes for seeds to mature. (Actually a pretty wide window in my experience but see seeds bulging out of sacks in this case)
it does
 

igrowone

Well-known member
Veteran
1 more praise to sing of LED lighting, at least for micro growing
been running my small cab with no fan
not needed, passive cooling is more than enough, 27 watts in 1.2 square feet
loving this feature
 

SoCoCrow

Member
Just spray everything down with water, turn a fan on and let it all dry. The pollen may have taken in a few places, but you should be fine.

If I go by what I'm seeing atm my fingers are crossed I really didn't get seeded to bad. It appears mostly some lower mugs that are fully swollen with seed. My gut was with as many hairs as I had showing it was going to be bad.

Sterile pollen in some of the girls maybe?

Is it your experience that many of the pistols that get hit with pollen do not pollinate in general?
 

Terpene

I love the smell of cannabis in the morning
Veteran
Anything that gets hit with pollen and has a day or two to sit and take the pollen in will create seeds. if you catch the pollen as it starts to drop with a water spray, you'll probably have very few, if any seeds.

Med Tree Seeds Catalina Wine Mixer at roughly 8.5 week chop:

picture.php


picture.php


picture.php


picture.php


HTsCG3C.gif
 

MilkMoney

New member
Scored a 400w cob unit( 4x(32x3w) chips
Got it at a steal so no loss if I want to break down the unit into 4 separate cobs and combine with my screw ins, what I need to know is distance from plants?
They're mounted on individual heatsinks which are mounted to fans and seemed to run cooler on the back of my hand than the screw ins so could I mount an run them on my existing screw in setup at same height?
Hope someone can help out cause I'm just itching to get it done hahaha
 

slevin_

Active member
Hi to all guys,
after this month whit HPS light i'm back to use my DIY Led Bulb Panel.

I've do some update,

old panel :
12 Led Bulbs x 2700K x 12w x 1080 Lumen

"new" panel :

6 Led Bulbs x 2700K x 12w x 1080 Lumen

6 Led Bulbs x 3000K x 24w x 2452 Lumen

A total of 216w panel.

The old panel give me 1,10 g/w, +-160g/144w
Super super lucky

I hope this panel give me satisfaction like the old lol

I have only one doubt, the distance from bulb to bud whit this new bulb...
For now i try 15-20cm.
Tonight or tomorrow up some pic.

Hi to all i'm happy to back in this post and see your work. :tiphat:


PS. Sorry for my bad english ahahah
 

psyphish

Well-known member
Veteran
Hi to all guys,
after this month whit HPS light i'm back to use my DIY Led Bulb Panel.

I've do some update,

old panel :
12 Led Bulbs x 2700K x 12w x 1080 Lumen

"new" panel :

6 Led Bulbs x 2700K x 12w x 1080 Lumen

6 Led Bulbs x 3000K x 24w x 2452 Lumen

A total of 216w panel.

The old panel give me 1,10 g/w, +-160g/144w
Super super lucky

I hope this panel give me satisfaction like the old lol

I have only one doubt, the distance from bulb to bud whit this new bulb...
For now i try 15-20cm.
Tonight or tomorrow up some pic.

Hi to all i'm happy to back in this post and see your work. :tiphat:


PS. Sorry for my bad english ahahah

Geesh that's a lot of work... Wouldn't it be easier at this point to just buy a Quantum Board? A lot more efficient.
 

bucketbrah

New member
1 more praise to sing of LED lighting, at least for micro growing
been running my small cab with no fan
not needed, passive cooling is more than enough, 27 watts in 1.2 square feet
loving this feature

Pic of cab? I am running 60w in .8 sqft, hoping for a 2 oz harvest.
 

igrowone

Well-known member
Veteran
Pic of cab? I am running 60w in .8 sqft, hoping for a 2 oz harvest.

click on my signature, old grow but same chamber
actually it's a tube made from aluminum flashing, kind of looks like a white tunnel
i think that help lower temps, the metal conducts the heat away nicely
 

SoCoCrow

Member
Interesting sativa phenos popping in my next batch. Have popped 8 beans from same plant and have 8 different phenotypes.

Sour Lemon mom X ?
 

Attachments

  • IMG_6998.jpg
    IMG_6998.jpg
    76.3 KB · Views: 17
  • IMG_6997.jpg
    IMG_6997.jpg
    57.4 KB · Views: 22
  • IMG_7006.jpg
    IMG_7006.jpg
    38.9 KB · Views: 18

slevin_

Active member
20ish id guess
it depends on the spread/room size because at low distance youll notice less spread

I work in 80x80 GB, last cicle whit 144w i've no probl whit 20cm but now i don't know the new power.

I try, Thank you HuffnPufferfish

Geesh that's a lot of work... Wouldn't it be easier at this point to just buy a Quantum Board? A lot more efficient.
I don't think it's a lot of work psyphish, just one hour for assemble everithing last year, now i have only to change the bulb.

I spent very little, i think total 50-60€ for cables, brackets, bulbs

now only some € for new 6 bulbs.

Some pic for understand better of last cicle.

picture.php

picture.php


picture.php


Love led :laughing:
 
Top