What's new

med-man

The TRUMP of SKUNK: making skunk loud again!
Boutique Breeder
ICMag Donor
Veteran
booyashacka

i am going to bring the pain in the room

my last one was a breeding project, so i didnt post much after veg.

sooooo. back tot he lecture at hand

i am just cleaning the room right now, and making some adjustments. i do usually recommend 1-3 grows in a room to dial her in coco soil or med-man mix. this one has had 4 crops so, looking good

i may make 1 table 20 feet, and 1 16 to be honest, but lets see what happens during the build

i will just list the supplies as i build

welcome and enjoy the show, hoping to bang out 3 from this room before my lic gets grnadfathered for life, how ever it happens :)

med-man
 

Phatlewtz

Member
I will tag along with this one mm. just so I don't show up empty handed I will make the popcorn! As far as cleaninv ...isn't that what marriage is for? And kids to larger extent... All of which would tell me to f off if they read this.
 

Wildrosebud

New member
Hey thanks for directing me to this thread it inspired me to join the forum :) I look forward to the grow room build! Oh and the bud porn of course to follow haha!

WRB OUT!
 

med-man

The TRUMP of SKUNK: making skunk loud again!
Boutique Breeder
ICMag Donor
Veteran
the tables

the tables

- 4 sheets of 4x8 osb
- 10 2x6x8 studs
- shit ton of screws
- 5 - 2x4x8 studs for the legs

and a jug of med-man brand b-kind

make sure to have a hole sawed in the furthest corners of each table for drainage. i like 6 inch squares now. easier the hole sawing, but whatever works.

build a frame to match the sheets of ply wood.

flip em over and attach the legs, boom

med-man
PIC_1978.jpg
PIC_1979.jpg
PIC_1980.jpg
PIC_1981.jpg
PIC_1982.jpg
 

med-man

The TRUMP of SKUNK: making skunk loud again!
Boutique Breeder
ICMag Donor
Veteran
water proofing

water proofing

- 2 x lids with 15 4 3/4" plants site and 1 exhaust hole
- 2 x lids with 15 4 3/4" plant site
- role of 6 mil 1000 sq/ft vapor barrier
- razor
- scissors
- bathroom calk + machine

roll out the vapor barrier on the tables, and line the chamber with folded VB make sure it is perfectly flat, no wrinkles or creases.

make an x where the drains are with a razor, and spread it open just enough to get your fist through



place lids over waterproofed beds, and caulg a thick bead around every hole. spread the bead out evenly around each hole. and roll over the VB, using 1 fold for 1 table and 1 fold for the other table.
squeez out all the air wherever there is VB meeting caulk. cure for 24 hours

med-man
PIC_1986.jpg
PIC_1989.jpg
PIC_1987.jpg
PIC_1988.jpg
 

med-man

The TRUMP of SKUNK: making skunk loud again!
Boutique Breeder
ICMag Donor
Veteran
lids

lids

- razor
- paper cutter
- roll of panda poly


cut out all the saw holes covered in VB

flip over lids

cover with panda poly

any work to do above the tables is best now, so i am doing the lighting and lighting harnesses

med-man
PIC_1990.jpg
PIC_1991.jpg
PIC_1992.jpg
PIC_1993.jpg
PIC_1607.jpg
 

med-man

The TRUMP of SKUNK: making skunk loud again!
Boutique Breeder
ICMag Donor
Veteran
lighting harness

lighting harness

- 5 2x8x8 studs
- 8 industrial screww hooks
- 4 industrial pullies
- 100 ft of industrial nylon rope
- 4 "bull horns"


cut a stud in half, and use the 4ft sections to enforce the 2 8 ft studs to make it a 16 foot long stud

place screw hooks in the cieling/stud aligned perfectly w eachother, then put pullies on the cieling ones. attach rope to the stud hook, then run it thru the pully back to the bull horns. raise the harness to confortable working level

attach all the shades evenly spaced to your new lighting harness.

i need to stress that i have 2 thick chains per table (side) attached to the roof and harnesses for safety purposes. god forbid something go wrong with the stud and pullies, it wont drop onto the tables, it will stay about 2.5 feet above it.

raise to the roof once completed to work on the plumbing :)

med-man
PIC_1994.jpg
PIC_1995.jpg
PIC_1996.jpg
PIC_1997.jpg
PIC_1998.jpg
 
Last edited:

Rolldaddy

Member
Nice work my dude!!!

Even after seeing so many of your builds the last few years, I still appreciate watching them from start till flourish. You da man!!!

Peace
 

med-man

The TRUMP of SKUNK: making skunk loud again!
Boutique Breeder
ICMag Donor
Veteran
preparing the lids for plumbing

preparing the lids for plumbing

- 56 baskets (5 inch)
- razor
- 2 x 6 inch x 3 foot flexi ducts

cut a double cross for every basket site being used. i am leaving out 4, 2 per table

make sure the doube cross is cut withing an inch of the wood. when placing in the baslet, you will have to florce it in by stretching the panda poly and this inche will protect the sawed hole expose wood from being exposed to moisture or any gassing off potential

med-man
PIC_1999.jpg
PIC_2000.jpg
PIC_2001.jpg
 

med-man

The TRUMP of SKUNK: making skunk loud again!
Boutique Breeder
ICMag Donor
Veteran
thanks for coming out dudes!

this one should be a breeze

med-man
 
Great attention to detail.Im going to be taking notes.I just built a 12x12 room with 4 600s and spent weeks and alot of money.In the beginning i couldn't wait to get done now im missing the fun of construction and innovation.Necessity really is the mother of invention.Keep it coming and i will tune in.
 

med-man

The TRUMP of SKUNK: making skunk loud again!
Boutique Breeder
ICMag Donor
Veteran
hey toker smoke

you would do really well with OG mmt's. 2 x 4x8 tables. 30 plants. so cheap to buildm and easy with a bit of knowhow and tools :)

med-man
 

Latest posts

Latest posts

Top