zappa66
Member
Hi all I had myself pretty much convinced that I wanted a QB but have sort of gone down the rabbit hole and am wondering if there are other ways to go about lighting a 2’ x 3’ area. Looking for the best bang for my buck with quality led. Mainly I’m looking at kits. There are a few rapid led kits that look decent. Main concern here with them is that I have never soldered anything before. Can’t be that hard. Are there any kits that I may be missing in the 200-300w range $200-350?
I am also considering using a (240)130w blurple blackstar panel I have. Does it make sense to add ~100w of QB or COB to that for a similar effect or should I just pony up and replace that wattage entirely?
3 cob (227.50) HLG-240H-C2100B driver + poke in chips
https://www.rapidled.com/vero29-triple-cob-array-kit/
260w qb ($325 ish)
https://growerslights.com/collectio...lighting-group-260-watt-quantum-board-led-kit
https://horticulturelightinggroup.com/collections/diy/products/260w-qb-led-kit
I am also considering using a (240)130w blurple blackstar panel I have. Does it make sense to add ~100w of QB or COB to that for a similar effect or should I just pony up and replace that wattage entirely?
3 cob (227.50) HLG-240H-C2100B driver + poke in chips
https://www.rapidled.com/vero29-triple-cob-array-kit/
260w qb ($325 ish)
https://growerslights.com/collectio...lighting-group-260-watt-quantum-board-led-kit
https://horticulturelightinggroup.com/collections/diy/products/260w-qb-led-kit