A couple of quick points:
200 deg F is quite hot and your system pressure will be in the 100psi range. The recovery pumps don't like head pressures that high. If the gas flow into the pump is that hot it'll be a lot hotter exiting the compressor head and seal life will be shortened.
Add a filter drier at the pump inlet, I've had issues with oil (cannabinoids) accumulating on the piston seals and causing seal failure. A filter won't impede flow much.
RB
200 deg F is quite hot and your system pressure will be in the 100psi range. The recovery pumps don't like head pressures that high. If the gas flow into the pump is that hot it'll be a lot hotter exiting the compressor head and seal life will be shortened.
Add a filter drier at the pump inlet, I've had issues with oil (cannabinoids) accumulating on the piston seals and causing seal failure. A filter won't impede flow much.
RB