i like it loud..........
i used to run 2 5 1/4 mb quart & 2 1" kicker r22 tweeters for highs ( one per side )
( hence the hole at the top )
i ended up smoking them last week so i upgraded to 3 4" infinty kappa's per side ( 6 all 2gether ) with built in 3/4" tweeter.
the tweets are silk sarround and titanium cones. some of the cleanest highs/mid's i have ever hurd...i have them all 3 ran in parallel so its seeing a 1.5 ohm load ( 4 ohms each ) they came with nice lil crossovers but where rated to low @ 80 cycles & 1.5 ohms is by far to low of a load so i built a 4ohm custem crossover @ 500 cycles 18db+ output so my amp see's a 4 ohm load but still use the infinty one for the tweeter's the reason i went with 500 cycles is im putting in a 8" for mid bass that will run 100-500 cycles then my bass from 20 -100 one of the biggest probs with audio ( car & home ) is crossover frequency when speakers overlap frequency u get cancellation witch = distortion
im going to cut the top off and cap it then carpet them and i will take pics of the rest of the system as i put it togther this is just the high/midhigh
i used to run 2 5 1/4 mb quart & 2 1" kicker r22 tweeters for highs ( one per side )
( hence the hole at the top )
i ended up smoking them last week so i upgraded to 3 4" infinty kappa's per side ( 6 all 2gether ) with built in 3/4" tweeter.
the tweets are silk sarround and titanium cones. some of the cleanest highs/mid's i have ever hurd...i have them all 3 ran in parallel so its seeing a 1.5 ohm load ( 4 ohms each ) they came with nice lil crossovers but where rated to low @ 80 cycles & 1.5 ohms is by far to low of a load so i built a 4ohm custem crossover @ 500 cycles 18db+ output so my amp see's a 4 ohm load but still use the infinty one for the tweeter's the reason i went with 500 cycles is im putting in a 8" for mid bass that will run 100-500 cycles then my bass from 20 -100 one of the biggest probs with audio ( car & home ) is crossover frequency when speakers overlap frequency u get cancellation witch = distortion
im going to cut the top off and cap it then carpet them and i will take pics of the rest of the system as i put it togther this is just the high/midhigh
Last edited: