S
Space Ghost
ok, here's my idea... In essence it would be a method for condensing and collecting cannabis vapor (like from a vaporizer) into a usable form (oil)
So what one would need is an industrial-sized vaporizer, by this i mean an extremely high capacity crucible and a larger than normal heating element and air pump. Then rather than filling a bag with vapor and inhaling like normal, you would route the vapor into small gauge tubing (maybe 1/4 or 1/8") and then have that tubing be really long and coil it in an ice water bath (maybe a large modified cooler?) to hasten the condensation process.
So now we've got a tube with vapor condensing into oily deposits on the inner walls of the tubing and with a strong air pump, the globs of oil would be pushed towards the end of the tubing. Or you could even push the oil out with a snake device that has the same diameter of the inside of the tubing (but this might not be necessary)
At the end of the tube (once we figure out the right length) just have a dish to collect the drippings and BAM! a safe way to make oil and with no possibility of contamination by denaturing agents, the only thing that would touch the raw cannabis would be hot air....
What do you think? plausible?
SG
So what one would need is an industrial-sized vaporizer, by this i mean an extremely high capacity crucible and a larger than normal heating element and air pump. Then rather than filling a bag with vapor and inhaling like normal, you would route the vapor into small gauge tubing (maybe 1/4 or 1/8") and then have that tubing be really long and coil it in an ice water bath (maybe a large modified cooler?) to hasten the condensation process.
So now we've got a tube with vapor condensing into oily deposits on the inner walls of the tubing and with a strong air pump, the globs of oil would be pushed towards the end of the tubing. Or you could even push the oil out with a snake device that has the same diameter of the inside of the tubing (but this might not be necessary)
At the end of the tube (once we figure out the right length) just have a dish to collect the drippings and BAM! a safe way to make oil and with no possibility of contamination by denaturing agents, the only thing that would touch the raw cannabis would be hot air....
What do you think? plausible?
SG