What's new

Alamony Grows

alamony2005

Active member
So I put to work the old materials I had laying around. I added a curtain to the room with 6mil black and white. The room is aready sealed up but I wanted to narrow in on the lighting SO I added some environmental controls. Here are some pics.

4182708599_b5e23ff571_o.jpg


4183471334_f2a21bf054_o.jpg


4182708651_21e3958d6e_o.jpg


4182708495_574c6b2bf3_o.jpg


4182708545_797a4989f5_o.jpg


4182708623_2d4d403801_o.jpg


4182708393_7df5ed6943_o.jpg


4183471172_8e0803a39e_o.jpg
 

alamony2005

Active member
Okay guys sorry I am super tired but here are some pics. I was NOT happy at all with the lid I made for my cloner tray. So I thought long and hard with a fat bowl beside me from the homie and made this:

The bottom is the same roughneck 18gal tote with the lid removed and vinyl weather stripping added to the top of the tote. The lid is a clear piece of lexan from home depot. I took one side of the protective coating off that and painted it a very thick coat of flat black. The other side was left on to keep the lexan below nice and clean. I took 2" net pots for .20 cents each and drilled holes in the lexan and inserted them accordingly. Be careful because the Lexan will snap under pressure as the hole saw drill bit pops through. If it does plastic weld it with a hot knife, solding iron or any method of heat source as you can see. DO NOT apply any toxic chemicals to bond it. After that I peeled the other half of the clear plastic coating off and put the pots in the holes. I placed a cube in the pots and stuck a clone or in this situation "seedlings" in the pots and set the timer for every 15 mins on/off for the misters below. *more later ima lay down..*

SDC12227.jpg


The bottom one cracked so I had to plastic weld ithe crack all the way though and its strong like new. "This is the first one made" (If some one already made this exact model I am sorry and give credit to you but its my word it was dreamed over a huge bowl)
SDC12228.jpg


SDC12232.jpg
 

Guyute54

Well-known member
ICMag Donor
Veteran
Looking real good in here man. I like all the Aero cloners. Plants are looing real frosty too. Nice work.
 

alamony2005

Active member
Here are two pics of my cloner/seedling starter. Think it works good enough?

SDC12352.jpg


SDC12353.jpg


Cali orange, Strawberry Cough, Gods gift, Grape Ape, 1 Garden plant in the back. I still have to go through and cut out like 3 or 4. Veg them, clone them, sex them, flower them, smoke them. =) Hopefully i got a 45day baby in there =)
 

alamony2005

Active member
Day 89 Flower. (day 9flush)

Day 89 Flower. (day 9flush)

Compare and Contrast. These are almost done.
there are only two which are close to being done, as they where started 2 weeks before the others.

Enjoy:

4286592228_792cea0544.jpg


4286592364_760144af88.jpg


4285850137_0337a9e241.jpg


4286592570_984c5debbf.jpg


4285850555_09c8262871.jpg


4285850669_660c9f8910.jpg
 

Latest posts

Latest posts

Top