What's new
  • Happy Birthday ICMag! Been 20 years since Gypsy Nirvana created the forum! We are celebrating with a 4/20 Giveaway and by launching a new Patreon tier called "420club". You can read more here.
  • Important notice: ICMag's T.O.U. has been updated. Please review it here. For your convenience, it is also available in the main forum menu, under 'Quick Links"!

Dri-Eaz and Santa Fe Dehumidifiers

TheDailyBaker

New member
Hey Guys, whoever has the dualXT and said its a piece of cake to install, what kind of brackets are you using? I'm planning on ordering one and want to be ready. I'm hoping a shear force style bracket into a couple of studs will do it, to hold that 133lbs, otherwise I'll probably build a 6-8'' platform just to get it off the ground, the condensate line looks awfuly low on the unit, so I'd imagine you can't just run it on the ground and it would have to be somewhat risen.
 

icdog

Member
Anyone know if these commercial units have a display of the humidity and a control gauge? I was about to buy a phoenix and it doesn't have this.
 

grow nerd

Active member
Veteran
Yes they have an analog knob for setting the humidistat. The water damage restoration models (phoenix line, etc) do not. better to use an environmental controller anyways.
 

growshopfrank

Well-known member
Veteran
Anyone know if these commercial units have a display of the humidity and a control gauge? I was about to buy a phoenix and it doesn't have this.

the santa fe classic has a built in control that works very well and also has a setting where the blower runs all the time that i find handy for room circulation no humidity display tho
a green air thc-1 is a reasonable priced humidity controller that can handle the restoration model dehumidifiers
 

icdog

Member
I can't decide between the santafe classic and the LGR drieze and phoenix models. They are a similar price, lots of great reviews of the classic, it doesn't have a pump so thats an extra 100 bucks, no humidity control or display on the LGR models is not great so I need a controller. Any suggestions?
 
A

ak-51

it doesn't have a pump so thats an extra 100 bucks
You could always hang it from the ceiling and then drain to somewhere that way, if there is a drain close enough.

I have mine hanging and then running into a 32 gallon trash can. I roll that water into my nutrients when the can gets full enough.
 
V

Veg N Out

I have a santa fe classic in my grow room and use dri eazlgr3500s in my drying rooms, if the lgr 7000 was out when I bought mine, 3 years agonow, I would get those...the 3500s are workhorses that I depend on season after season
 

icdog

Member
Why would you use the 3500's in the drying room and not in the grow? Are they better then the classic?
 
V

Veg N Out

I grow out door and use the 3500s to dry. For my little 10kw indoor room the Santa fe classic is plenty
 

icdog

Member
Any more comments between a sante fe and the LGR drieze and phoenix units. They are about the same price. Do the LGR models pump out more heat then the santa fe or less heat since they are LGR and possibly more efficient?
 
I own 6 2800i Dri-Eaz dehues as well as 2 LGR Evolution ones from the same brand. Excellent machines, never skip a beat. Change the air filter every so often and that's about it. Really strong body as well.
The Evolution ones don't have a humidistat as its intended primarily for restoration work.
I went with Dri-Eaz because of reliability, quality and the fact that I have a service point fairly close by.
 

Tyga

Active member
Veteran
Looks like we're still on the same page. I been looking all day for something. Checkin Ebay for used ones but would prefer new for sure.

Classic Sante fe is a safe bet... I got lucky and found some Dri-eaz's on craigslist... Looks like thats the route I will be taking!
 
Has anyone heard anything or had any experience with the quest dehumidifier line? They are made by the same people that make the Santa fes but avertised specifically for greenhouses and grow environments with a better warranty that won't get voided if they know you used it in a grow environment. Santa Fe won't help you if they know you we're using it in a grow room..

Check it out this is basically the same as the Santa Fe dual xt with the same specs..
http://www.questprotect.com/pdf/Quest_105_155_205_Dual_Spec_Sheet.pdf
 

irobot sd

Member
I have a question to any body using the dri eaz that does not have a humidistat.
How exactly do you run these? Are they constantly running? Do they auto shut off at a specific rh %?

They seem the best for restorations Just wanted to see any tricks or techniques for grow related usage. I'm looking at the 1200 model..
 

Treetroit City

Moderately Super
Veteran
I grow out door and use the 3500s to dry. For my little 10kw indoor room the Santa fe classic is plenty

Well shit, if the classic can handle 10K I'm thinking the Santa Fe Compact could handle a 4K.

Anyone have any experience with the compact model?

Need to pull the trigger this week on something.

:thank you:
 

LEDNewbie

Active member
Veteran
Well shit, if the classic can handle 10K I'm thinking the Santa Fe Compact could handle a 4K.

Anyone have any experience with the compact model?

Need to pull the trigger this week on something.

:thank you:

Like to know the same thing. Wondering if the compact will handle my dense canopy under my 3kw. 5x16 ft area of dense canopy?? As of right now my 60 pint can only bring it down to 72% and making allot of heat doing it!!! Just ordered another 70 pint unit but thinking if one Santa Fe compact will do the job maybe that would save me some $$$$$ on my energy bill!!!
 

Treetroit City

Moderately Super
Veteran
Well LED we'll find out soon. I went ahead and ordered the compact. I was in the same situation with my current model(Soleus 45 pint)not touching the humidity. Goes from mid 50's lights on to upper 70's lights off.

I'm starting week 5 so I couldn't wait any longer. I'll post the results from my data logger when the new unit gets here.
 

LEDNewbie

Active member
Veteran
Well LED we'll find out soon. I went ahead and ordered the compact. I was in the same situation with my current model(Soleus 45 pint)not touching the humidity. Goes from mid 50's lights on to upper 70's lights off.

I'm starting week 5 so I couldn't wait any longer. I'll post the results from my data logger when the new unit gets here.

awesome brother!! Thanks!! looking forward to it!

when my lights are on and a/c running my humidity will go down to 60%. As soon as the a/c shuts off my humidity begins to climb and reaches about 70% which at that point the a/c turns back on again. all my temp, co2 and humidity readings are read just above the canopy with my iponic controller

you can see gauge hanging above canopy in this pic


Absolutely LOVE this thing!!! controls everything in my room plus data logs all readings so I can view whats happening when I'm not there. Another great feature about this controller is I can check and see what my room is doing at any time with my iphone:biggrin:
 
Top