-
Happy Birthday ICMag! Been 20 years since Gypsy Nirvana created the forum! We are celebrating with a 4/20 Giveaway and by launching a new Patreon tier called "420club". You can read more here.
-
Important notice: ICMag's T.O.U. has been updated. Please review it here. For your convenience, it is also available in the main forum menu, under 'Quick Links"!
This Is So BADASS!!! May Change The Way I Medicate Forever!!!!
- Thread starter krunchbubble
- Start date
yes you can...
Loading is pretty simple once you get a technique down that works for you.
When you pull the white rubber cap on the top off you will see a white filling. You take that out then you need to get your wax to the bottom of the cart..
I put a toothpick in the tube that's centered in the cart to cover the hole and I also use it to give me some leverage (move the tube to opposite side I'm currently loading into).
You'll get the idea quick..
Here's an empty cart
When you pull the white rubber cap on the top off you will see a white filling. You take that out then you need to get your wax to the bottom of the cart..
I put a toothpick in the tube that's centered in the cart to cover the hole and I also use it to give me some leverage (move the tube to opposite side I'm currently loading into).
You'll get the idea quick..
Here's an empty cart
Just to clarify "oil".... it could be waxy that is not runny but more like paste? is that what you are talking about when you say oil?
any pics of it loaded and the coil hot like some of the pics i posted earlier?
Horizontal Coil and not the Vertical Coil is that correct?
I have the Ego T sitting here and want to make sure i get the right carts for what i call Wax. you can handle it with your hands.. but not for long before its a sticky mess...
Shit just a few post up you answered this question about straight wax.. Ok making more orders.
Trippy Stix. Peace GS
Juicepuddle
Member
Holy fuck, purge better / everything better.
These clearly have tons of solvent left and even more plant contaminants.
Heres some oil I recently got and consider dirty with solvent
The squigly lines are butane hahahahaha, just look at yours, so many squigly lines, would you like some cannabis with your tane?
For real, looks like poison.
Juicepuddle
Member
Anyone ordering that from you... I pitty them. Your basically scum selling horrid death poison, ofcourse, you have room to learn and adjust, but your yield will go down, and quality up.
@Tripstick
@Tripstick
what the fuck are you talking about. Go away troll, i dont sell shit.. no idea why you would think such a thing. you have no clue about the pics and your assumptions are foolish..
When you use nothing but buds it looks like that.. Enjoy your low end shit douche bag
I have to agree, kind of a troll post, but he is right. Your shit is so fucking unpurged it's not even funny. I get shatter from top shelf nugs all damn day, it just takes a lil more work than spraying some shit in a pan and leaving it. I'm talkin about shit that tests well in to the 20% to 25% range. Wax and budda are fails, do some real reading on extracting essential oils buddy. People like you are why bho gets such a bad rep.
Don't have time to read all 10 pages right now, but one of my patients uses a Persei. The unit costs about 200, but is variable voltage, and refillable. While it doesn't hit like a dab with the proper glassware, but an awesome portable option...
Juicepuddle
Member
Calm down, I clearly misunderstood this "Making orders"
Clarify please.
Edit:
Oh, I will, this was my first ever oil attempt and it only gets better from there
so Ive been playing with this a lot, and its great. I mostly do it like krunchbubble has been proposing and I like it.
I bought two of these expensive cartomizers and they really work well. They might have been mentioned before and commented that they used oil too quick, but thats not my experience. They are like a kanger but stainless, half as tall, no central tube thing that is for being surrounded by polyfill, supposedly a ceramic and nichrome setup without solders, reusable and rugged so you can soak it in ethanol if it gums up.
Its not better than a standard kanger, in fact its just about the same smoking experience. It is much easier to fill cause its short and no central tube, I just keep bho in a little teflon bag in the freezer, and break off a piece and drop it right in. I havent had it but for about 1 gram, and its doing fine being refilled. Fits the standard 510 threads and works fine on an eco-t batter or other standard batteries. Only fault is expensive but if it can be reused for a while, then that might not be the case.
http://www.gentlemansvapes.com/products/hash-oil-atomizer
I bought two of these expensive cartomizers and they really work well. They might have been mentioned before and commented that they used oil too quick, but thats not my experience. They are like a kanger but stainless, half as tall, no central tube thing that is for being surrounded by polyfill, supposedly a ceramic and nichrome setup without solders, reusable and rugged so you can soak it in ethanol if it gums up.
Its not better than a standard kanger, in fact its just about the same smoking experience. It is much easier to fill cause its short and no central tube, I just keep bho in a little teflon bag in the freezer, and break off a piece and drop it right in. I havent had it but for about 1 gram, and its doing fine being refilled. Fits the standard 510 threads and works fine on an eco-t batter or other standard batteries. Only fault is expensive but if it can be reused for a while, then that might not be the case.
http://www.gentlemansvapes.com/products/hash-oil-atomizer
Juicepuddle
Member
Calm down, I clearly misunderstood this "Making orders"
Clarify please.
Edit:Oh, I will, this was my first ever oil attempt and it only gets better from there
Its obvious your making that trash to sell to poor people, even dumber then you are.
Whats your go to? I see the ego c battery
eGo C Upgrade...
any of these work with bubble?
