mfts, 4 x 4' x 16'

[the med man]

so all the babies are transplanted in 3 inch cubes.

the lids flipped and polied up with baskets added. plus drip line ran,

a good pic of how bright and broad the foot print of an adjustawing 600w set up. ive vegged plants in 5x10 feet with 1 600 in an awing. just awesome.

i just have to rig up the feed lines to the pumps and drip lines and robert is your dads brother lol, mm

 

[~Shhh~]

That is a very decent spread of light there, and real even too.

I used to have an adjustashade I think it was white iirc. Worked very well with the heat spreader thing. How long are you going to veg these for?

 

[haxi]

Looking realy great here!
Healthy plants and clean room, that's it

Hope the best for you the med man !

Peace

 

[the med man]

plants will usually prevg no more then 10 days the veg in the baskets in the tables no more then 10 days. its usually a 75 day turn around if you have prevg dialed and planting whilst others are trimming. 75 days starins will finish in 65 with no stress and co2, mm

That is a very decent spread of light there, and real even too.

I used to have an adjustashade I think it was white iirc. Worked very well with the heat spreader thing. How long are you going to veg these for?

 

[the med man]

thx buddy,

i will finish up polying the walls, and add the rez cleaner today. i am also happy to say i have a pre 2000 bluberry, a bubble haze a pain killer and a sfv og kush to flower in in an area i cleaned just beyond these tables i just built. nothing like have 8 jars of different kind all at once. those trees are older moms i dont need to keep around anymore. cant wait for the blueberry, its been so long since ive had the og cut that went around back in the day, mm

Looking realy great here!
Healthy plants and clean room, that's it

Hope the best for you the med man !

Peace

 

[shuswap]

glad to see things up and running,i just installed my ac and co2 and planted the tables last night im doing the grapefruit again as it rocked last time and one row of life saver from bog to see how it compares,the buds were so freaking huge last time omg....okay i want some of your knowledge on running a sealed room,
what temps do you run?
what level of co2 ?
and what humidity do you run?

 

[the med man]

glad to see things up and running,i just installed my ac and co2 and planted the tables last night im doing the grapefruit again as it rocked last time and one row of life saver from bog to see how it compares,the buds were so freaking huge last time omg....okay i want some of your knowledge on running a sealed room,
what temps do you run?
what level of co2 ?
and what humidity do you run?

hey shwap.

would have been nice to see pix, and ya, they get plump all right.

for temp i veg at 75 f. then increase to a max of 80f. usually finish at 78.

co2 is none for first 7 days, then start at 1000 and finish at 1500 around week 4 or 5, then turn her down to 1250-1000 for last 2 weeks.

rh% starts at 75 then down to 40 if possible for ripening.

every week i make adjustments subject to strain, week of growth, any stress and or other variables, mm

 

[SS-]

Goodness. Can't wait to get these tables started. Applied some of your techniques to a small tree and landed 4 more oz. more than the usual of CHUNKY buds to bring a total of 12oz from a VERY sick nutrient deficient plant infested with thrips. Was so surprised to get 12oz out of a 3.5x3.5 canopy only maybe 18 inches deep especially with the circumstances. Had to cut it down a bit earliar than usual. 68 out of a usual 85 and it was still DANK.

If anyone is wondering. I fimmed and left the four leaves + crown. my partner freaked when he saw how the plant looked, but it ended up yielding more than all the healthy clones haha.

 

[SS-]

Oh yeah. and this was with temperature climbing to high 90's somedays. Thanks to partner EC even climbed to 4.0 when I usually never go beyond 1.4. No telling for how long.

 

[the med man]

lol hahaha,

that always happens ........ they should look like that or get that reaction if you've done the mmm properly, mm

Goodness. Can't wait to get these tables started. Applied some of your techniques to a small tree and landed 4 more oz. more than the usual of CHUNKY buds to bring a total of 12oz from a VERY sick nutrient deficient plant infested with thrips. Was so surprised to get 12oz out of a 3.5x3.5 canopy only maybe 18 inches deep especially with the circumstances. Had to cut it down a bit earliar than usual. 68 out of a usual 85 and it was still DANK.

If anyone is wondering. I fimmed and left the four leaves + crown. my partner freaked when he saw how the plant looked, but it ended up yielding more than all the healthy clones haha.

 

[the med man]

i once over fed x2 and burnt all the roots off of every plant lol, they didnt grow for 2 weeks and i still got 2 pounds a light of kush. mind you my pk cut is a huge hog, but still, lol, mm

Oh yeah. and this was with temperature climbing to high 90's somedays. Thanks to partner EC even climbed to 4.0 when I usually never go beyond 1.4. No telling for how long.

 

[shuswap]

lasttime i ran these tables i had a problem with the clones wilting,the light is 3 feet above them and the pump is on as low as i can get her,i now have the pumpon an hour off an hour ill see what they look like in a few hours,any tips for this situation dr med man?

 

[the med man]

hey swap.

1 - they arent used to the reflection from the white poly below on the undersides of the leaves

2 - they arent used to the flow either

3- u arent vegging 18/6

4 - temps are too high (air is relative to res which usually runs 5 degrees cooler then the air)

5 - all the lights are on veg with 25% for 3 days, then 50% for 3 days, then full strength for 3 days preshockflowering 36 hours dark

6 - not enough roots popping thru the bottoms of the 3 inch cubes

turn water off and turn lights back to 1 or 2 and drop to 18/6. this should remedy the [problem in a day or two. 3 days tops, mm

 

[shuswap]

1-i concur with u there
2-yes flow is a bit much for them,there getting used to it though
3-yes i am
4-72 f
5-of 4 lights im running 2 at opposite ends of tables at 3 feet high,as high as they will go
6-rootmass is there ,lots ofrootsid show you apic but i cantfigure outhow topost here
ill stop the flow for a few hours and try one light and see how they look,thanxs....

 

[the med man]

just remember, a goo preveg is all about roots and not really growth. albeit there are relative to ane another, i noitic 2 weeks in 3 inch cubes under a couple sunblasters really does the trick to get them going. plant them 2 weeks to harvest in another area, that way you can plant whilst others are trimming, mm

 

[shuswap]

what are your thoughts on having them in a flood table toget the roots coming out better and more growth,before going in tothe tables,cubes in 5 inch pots and then filled with hydroton then the flood table...?

 

[the med man]

why not just put 21 3 inch cubes per tray and bottom feed with a tray with holes the cubes are in? mm

 

[the med man]

so, here we go lkadies and gents,

all the lights are hung,

all the cords are arrnged and labelled,

my 2 1200 gph mag drives just emptied both reses of cleansing solution,

1 res is filled with grow nutes,

all the poly is up,

all the babies got their last bottom feed (tray w holes in tray),

just a quick sweep and a couple more wall mount fans and hang the c02 burener and do a diy damper for the a/c,

plus plop the best babies in every basket and add hydroton, turn on the pumps and we are rockin, mm

 

[shuswap]

looking good d,i agree witrh a good2 weeks in cubes but where i see the poor link is keeping these in the 3 inch cubes and constant feeding,i amgoing to try a 4x4 table with just a starter cube and hydrton without the 3 inch cube,i think they willgoquicker without much transplant shock,vegging a bitin the 4x4 veg room first soon as the roots are coming outof the baskets transplantand then feed,i know what works for one doesnt work foreveryone,just trying tomake it work better for me,peace

 

[the med man]

do what works for you, gorws are always subject to many factors, mm