6K Sealed Chernobyl
- Thread starter Vincent Vega
- Start date
Those soil beds look familiar. Ever post on Cannabis.com?
Vincent Vega
Member
mikeross glad to see you stop by. 
I'm running mostly Chernobyl and a few kush.
The cuts are vegged in the beds for 4-7 days under 24hrs running evens and odds meaning for 12 hr I'll have 1,3,5,7 and 9 running then for the next 12 hrs 2,4,6,8 and 10.
Mostly to save power and also to give the plants a little chillout period even though they still receive plenty of side-lighting. After a couple days when the cuts are well adjusted I run evens and odds during the day and full power at night just so the meter isn't spinning excessively during the day.
bigjay: Whats up man?
MarquisBlack: Nah man never posted there but this is a pretty common setup in my neck of the woods.
Bahamut: Fuck yea man I may not use my clothes dryer or dishwasher but you've gotta rock out the tunes for the girls right?
Watering is done with a pump and wand. Another pump sits in the res and recirculates. Water is temped to 68F (res heater) and ph'd to 6.3 (Nutradip Trimeter).
Plants are currently being fed Thrive alive B1 red and Revive. Beds were soaked with Superboost (waaay oversoaked...Fuuuuck!) before planting.
The smaller cuts consequently didn't like that too much and were totally stunted, so unfortunately I'm going to have some holes but w/e live and learn right?
Anyhow on with the pics. These are current pics taken at day 7. This of course is most of the main room. Doing OK aside from a few stragglers. Flipping tomorrow
Here is about 2/3 of the small room, couldn't get a real good pic, it's so crowded in there.
Well that's it for now see you guys later!
I'm running mostly Chernobyl and a few kush.
The cuts are vegged in the beds for 4-7 days under 24hrs running evens and odds meaning for 12 hr I'll have 1,3,5,7 and 9 running then for the next 12 hrs 2,4,6,8 and 10.
Mostly to save power and also to give the plants a little chillout period even though they still receive plenty of side-lighting. After a couple days when the cuts are well adjusted I run evens and odds during the day and full power at night just so the meter isn't spinning excessively during the day.
bigjay: Whats up man?
MarquisBlack: Nah man never posted there but this is a pretty common setup in my neck of the woods.
Bahamut: Fuck yea man I may not use my clothes dryer or dishwasher but you've gotta rock out the tunes for the girls right?
Watering is done with a pump and wand. Another pump sits in the res and recirculates. Water is temped to 68F (res heater) and ph'd to 6.3 (Nutradip Trimeter).
Plants are currently being fed Thrive alive B1 red and Revive. Beds were soaked with Superboost (waaay oversoaked...Fuuuuck!) before planting.
The smaller cuts consequently didn't like that too much and were totally stunted, so unfortunately I'm going to have some holes but w/e live and learn right?
Anyhow on with the pics. These are current pics taken at day 7. This of course is most of the main room. Doing OK aside from a few stragglers. Flipping tomorrow
Here is about 2/3 of the small room, couldn't get a real good pic, it's so crowded in there.
Well that's it for now see you guys later!
fsttimes81
Member
Subscribed!!!
thirtyshort
Member
Nice work my man!!! Can't wait to see this shit turn out some nice bud.
Nice buildout! I have the same chair and mine is broken like that too. lol
Why chains on your lights? Those are going to be a BITCH to raise during the grow. Good rope and pulleys would be a better solution. It's such a nice build I can't help but wonder why you went with chains that don't look easily adjustable. How are you raising your lights?
EDIT: Or do you just plan to keep the lights at same height entire grow?
Why chains on your lights? Those are going to be a BITCH to raise during the grow. Good rope and pulleys would be a better solution. It's such a nice build I can't help but wonder why you went with chains that don't look easily adjustable. How are you raising your lights?
EDIT: Or do you just plan to keep the lights at same height entire grow?
Last edited:
O
ogatec
very very clean (exept for the soil)...i would like to see more details about the ac box.. looks great.
pugnacious
Active member
Man im loving these threads on iCMag lately.
Some quick questions. How much was the lumber and insulation? What is your soil mix? and how many plants per soil bed?
Man I love looking at clean grow rooms.
Some quick questions. How much was the lumber and insulation? What is your soil mix? and how many plants per soil bed?
Man I love looking at clean grow rooms.
FrankRizzo
Listen to me jerky
Very clean
So legit, nice use of space man.
JefersonAirplan
Member
How do they drain out from water? Am I missing something?
SQWEET!
M
Mr-B
Great grow brother!
The only worry I would have is the no drain situation you have but, since you mentioned your other grow (located somewhere else) I'm sure you have run this type of planting bed before.
Looks very professional, I can't wait to see what kind of bud you produce.
B
The only worry I would have is the no drain situation you have but, since you mentioned your other grow (located somewhere else) I'm sure you have run this type of planting bed before.
Looks very professional, I can't wait to see what kind of bud you produce.
B
Dern, there was a dude over there with the same soil-bed style who was running Chernobyl, as well. I think I remember him claiming well over 1g/watt.
Can't wait to see this bangin' out buds. Good luck.
Can't wait to see this bangin' out buds. Good luck.
greenthumbnewb
Member
Latest posts
-
-
Senators introduce bill to federally legalise cannabis.- Latest: Thegreengrower64
-
-
Latest posts
-
-
Senators introduce bill to federally legalise cannabis.
- Latest: Thegreengrower64
-
-
