Stealthgrow831
Member
I'm sorrry but I am reposting this write up I did but here is where we are at as of now:
This will be my first grow and thus my first attempt at building a grow box. I read around on the net to get ideas and decided to go with Rubbermaid totes stacked on top of one another. I am going to jump straight to the end of my construction....mainly because I didn't take step by step pictures.
My thoughts behind a grow box was this:
1) Had to be stealth (hidden but can be in plain sight)
2) Had t be efficient but not too cheap or expensive...I decided paying about 200-250 was a good starting point. (haven't added up the prices yet but will do that soon to see final price)
3) Had to be quite (AKA PC COMP FANS)
4) wanted to use CFL's to not draw to much attention to heat and power draw.
5) have a large enough area for a sizable micro grow (aka at least 2- more like 3 plants)
6) GOTTA HAVE SOME FUN WITH IT( I'M VERY EXCITED OVER THIS GROWING ADVENTURE LOL....MUST SOUND LIKE A LITTLE KID LOL)
Here's the basic idea:
two 37 gallon totes stacked on top on one anther (I'm going for stealth so i cut out the bottom of the top tote and the top of the bottom on to make it hallow inside). There is a third tote on top of the stack which is my utilities room. This is where my carbon filters are, fans, and power supply.
My goal after doing my research was to separate the grow area from the light area. I found that most people was having problems keeping these designs temperature down. I then decided to build a box to house the lights and place it inside the top of the box. Pictures will tell more.
I'd say the hardest part of this build was the construction of the light box. I spent a lot of time just tinkering with it. lol
As of now I am waiting for my computer fans to arrive in the mail (here thursday) and then I will be basically ready to grow.
I also got this idea from another design and only a few of my own ideas in the end. I don't know the rules completely so I am not sure I am allowed to post about another site...but its where I got my original idea.
ADVISE AND COMMENTS ARE WELCOME!!
I will hopefully be starting my grow as early as next week. Here's some pics of my box....sorry i don't have any of the earlier construction.
You'll notice i have no fans (waiting for them in the mail) and no intake cut yet. All the last little things I have to do will be done by the end of the week. Expect a finished grow box by monday!!!
(OK i tried to figure out how to post my pictures but in my noobness i couldn't lol) someone got ideas about how to post em. Thanks....I'll update once i get fans....or i figure out how to post these damn pics lol
OK I think I figured out the posting pictures issue....here it goes
This First pic is of the box itself and what it will look like from the outside. Notice the top tote will not be completely light proof as of now but if it still isn't with the installation of the fans then I will have to make some changes...no biggie though...
P.S. Sorry about the sideways pics....i'll see about rotating tomorrow. edit (i flipped it)
Next is two pics of the inside of the grow area. This will be below my light box (which is completely closed off from the grow area) It's painted a glossy black (all they had at home depot) that bonds to plastic easily and I put an emergency blanket (got from a sporting goods store) on the interior walls to reflect the light. I choose this way before the paint wasn't cutting it when it came to making the totes light proof. OK enough rambling...
This next pic is of the box that houses all my lighting. I liked the idea of keeping my grow area and light area separate from each other to better deal with the heat issue.
P.S. this is my fav accomplishment thus far and it was the hardest part to build too. Wiring took awhile to say the least....not that i didn't know what i was doing but that it was tedious.
My utilities room. the holes on the ends are going to be an intake and exhaust for the light box and the other two are exhausts for the grow room. I have already installed carbon filters in the two center holes. One pic is of the box with the lights on and one is with the lights off. I am getting the fans this thursday and should have the rest of the box completed by monday.
That's it for now...comments and more ideas are always welcome...thanks guys and i got a lot of my ideas from this sites and others dedicated to the cultivation of this great plant we call marijuana.
OK now tonight I am going to be putting in the fans and getting ready to start the grow. I am going to be getting some seeds soon. Now sure of the strain and I am going to assume it'll be some bagseed. let me know what you think thanks....
P.S. I want to give credit for my design to Blue_adept, I made a few mods to it but the whole idea behind removing the lights from the grow room was his idea. Thanks man u r the reason I am into this grow but I do admit building it was tough lol. but thanks for the idea and hopefully we'll come out with some amazing girls lol
http://www.icmag.com/ic/images/smilies/woohoo.gifhttp://www.icmag.com/ic/images/smilies/petard2.gif
This will be my first grow and thus my first attempt at building a grow box. I read around on the net to get ideas and decided to go with Rubbermaid totes stacked on top of one another. I am going to jump straight to the end of my construction....mainly because I didn't take step by step pictures.
My thoughts behind a grow box was this:
1) Had to be stealth (hidden but can be in plain sight)
2) Had t be efficient but not too cheap or expensive...I decided paying about 200-250 was a good starting point. (haven't added up the prices yet but will do that soon to see final price)
3) Had to be quite (AKA PC COMP FANS)
4) wanted to use CFL's to not draw to much attention to heat and power draw.
5) have a large enough area for a sizable micro grow (aka at least 2- more like 3 plants)
6) GOTTA HAVE SOME FUN WITH IT( I'M VERY EXCITED OVER THIS GROWING ADVENTURE LOL....MUST SOUND LIKE A LITTLE KID LOL)
Here's the basic idea:
two 37 gallon totes stacked on top on one anther (I'm going for stealth so i cut out the bottom of the top tote and the top of the bottom on to make it hallow inside). There is a third tote on top of the stack which is my utilities room. This is where my carbon filters are, fans, and power supply.
My goal after doing my research was to separate the grow area from the light area. I found that most people was having problems keeping these designs temperature down. I then decided to build a box to house the lights and place it inside the top of the box. Pictures will tell more.
I'd say the hardest part of this build was the construction of the light box. I spent a lot of time just tinkering with it. lol
As of now I am waiting for my computer fans to arrive in the mail (here thursday) and then I will be basically ready to grow.
I also got this idea from another design and only a few of my own ideas in the end. I don't know the rules completely so I am not sure I am allowed to post about another site...but its where I got my original idea.
ADVISE AND COMMENTS ARE WELCOME!!
I will hopefully be starting my grow as early as next week. Here's some pics of my box....sorry i don't have any of the earlier construction.
You'll notice i have no fans (waiting for them in the mail) and no intake cut yet. All the last little things I have to do will be done by the end of the week. Expect a finished grow box by monday!!!
(OK i tried to figure out how to post my pictures but in my noobness i couldn't lol) someone got ideas about how to post em. Thanks....I'll update once i get fans....or i figure out how to post these damn pics lol
OK I think I figured out the posting pictures issue....here it goes
This First pic is of the box itself and what it will look like from the outside. Notice the top tote will not be completely light proof as of now but if it still isn't with the installation of the fans then I will have to make some changes...no biggie though...
P.S. Sorry about the sideways pics....i'll see about rotating tomorrow. edit (i flipped it)
Next is two pics of the inside of the grow area. This will be below my light box (which is completely closed off from the grow area) It's painted a glossy black (all they had at home depot) that bonds to plastic easily and I put an emergency blanket (got from a sporting goods store) on the interior walls to reflect the light. I choose this way before the paint wasn't cutting it when it came to making the totes light proof. OK enough rambling...
This next pic is of the box that houses all my lighting. I liked the idea of keeping my grow area and light area separate from each other to better deal with the heat issue.
P.S. this is my fav accomplishment thus far and it was the hardest part to build too. Wiring took awhile to say the least....not that i didn't know what i was doing but that it was tedious.
My utilities room. the holes on the ends are going to be an intake and exhaust for the light box and the other two are exhausts for the grow room. I have already installed carbon filters in the two center holes. One pic is of the box with the lights on and one is with the lights off. I am getting the fans this thursday and should have the rest of the box completed by monday.
That's it for now...comments and more ideas are always welcome...thanks guys and i got a lot of my ideas from this sites and others dedicated to the cultivation of this great plant we call marijuana.
OK now tonight I am going to be putting in the fans and getting ready to start the grow. I am going to be getting some seeds soon. Now sure of the strain and I am going to assume it'll be some bagseed. let me know what you think thanks....
P.S. I want to give credit for my design to Blue_adept, I made a few mods to it but the whole idea behind removing the lights from the grow room was his idea. Thanks man u r the reason I am into this grow but I do admit building it was tough lol. but thanks for the idea and hopefully we'll come out with some amazing girls lol
http://www.icmag.com/ic/images/smilies/woohoo.gifhttp://www.icmag.com/ic/images/smilies/petard2.gif
Last edited:
I will also be posting pictures this afternoon of my finished box and the seeds. thanks
(not anymore 1-29-09)
