freedominphilly
Active member
Whew! Yeah man, looking very healthy indeed. My mouth is already watering.
600 Watts 8 Strains 25 Plants
- Thread starter ARTofMAKINGfire
- Start date
aloneinthewoods
Member
great thread mate im in on this one ! im just starting the same size grow same amount of plants same light and also three strains " sage " the church an some killer bagseed cant wait to see how this turns out . whats you expected yeild with this set up ?? an what size pots you using ??
S
ShawnyBoy
oh man im lovn this thread!!
i followed ur last grow wit the cheese,glad it turned out
that good for ya!!
what type of ventilation r u using (scrubber?)
Cheers
i followed ur last grow wit the cheese,glad it turned out
that good for ya!!
what type of ventilation r u using (scrubber?)
Cheers
great grow
run some of that uptown man!!
run some of that uptown man!!
too bad about the balls, but at least u had a bunch of fine genetics to fall back on!
still lookin good!
still lookin good!
Had a nitrogen defeciency. Ran out of veg formula. Got some more and foliar sprayed. Also gave them some to drink.
I'm deciding if I'm going to flip the light tonight or allow them to recover first. I'm thinking flip the light and they'll be fine.
I'm deciding if I'm going to flip the light tonight or allow them to recover first. I'm thinking flip the light and they'll be fine.
S
ShawnyBoy
Flip it! Flip it! Flip it! LoL
Hey ART, i was wondering what u use for intake
and your exaust this time round!?
Hey ART, i was wondering what u use for intake
and your exaust this time round!?
ARTofMAKINGfire said:
So sad they all turned male, i ordered some chem DD i never try this kind befor....
Glad to see some orange bud, for years i did't heard about orange bud, good to see she still been cultivated.
Wish u the best for the following steps...
M
moses224
Those males will make for good crosses. Best of luck you got a great start
M
MeltingPot
OooohwEEE...Nice set ArT...Lots of lovelies going there...Really have to try the cheese and the white...How does the Dabney compare to DJsBlue?
Nice work brother,
MP
Nice work brother,
MP
H.V.A.C./R
H.V.A.C./R
I have two cabinets running off one 6" Elicent inline.
The first cabinet. A C-13 with a 250 in it.
Filtered air enter the cabinet through the bottom.
The cabinet.
And it is exhausted through the top. I cut a 6" hole and used an elbow out. I added a damper to the elbow so that I can control the flow of air in the cabinet. I can shut airflow off completly when not in use. This duct comes out and runs behind the other cabinet tying in. I'm getting ahead of myself. Here is the duct leaving the C-13 and heading behind the larger cabinet.
It runs behind the larger cabinet.
And T's into the duct run coming out of the larger cabinet containing the 600.
Here is the penetration on the larger cabinet I built. Notice the handle? That is also an air damper allowing me to fine tune the airflow. I can easily find a perfect balance for both cabinets and maximize efficiency.
Here it is tying into my fan. I use my fan to suck air. I do this so that any air leaks will be SUCKING in air from the room the cabinets sit in. NOT BLOWING STANK air everywhere. I work with these types of blowers in my trade often and the are horses. They seldom break and can be used however you need to use em.
I took the cushion off a chair I seen on the curb and laid my scrubber on top. Not blocking any airflow. I rest it right underneath my A/C so that in the summer, the hot air is immediately removed and I seperated it as you see here. It makes a huge difference as most all of the hot air is sucked in through the return and cooled. Also, the A/C's temperature sensor that controls the thermostat generally operates off what temperature is coming out of my ducts. Mountain Aire scrubber. Expensive. Works.
Here is the intake setup on the 600 cabinet. It was specially designed and took alot of thought. I ended up stacking 3 accordian doors that were cut, assembled in opposite directions, painted black on the inside. These are also filtered using the same monopleated 20X20X1 filters shown earlier.
Here is what the intakes look like on the inside. They do not leak ANY light whatsoever.
Here is where the air is sucked out of. I also sealed the hood with glass.
I attach the other end to a piece of 6" flex and that leaves the cabinet into the elbow down, T ing into the rest as shown earlier.
That was for all you interested in my ventilation setup. I take pride in it as I have adapted to my surroundings well. I like the fact I can cool two cabinets with one fan. This is currently my pride and joy, but it is nothing compared to what you will see in the future from me...
H.V.A.C./R
I have two cabinets running off one 6" Elicent inline.
The first cabinet. A C-13 with a 250 in it.
Filtered air enter the cabinet through the bottom.
The cabinet.
And it is exhausted through the top. I cut a 6" hole and used an elbow out. I added a damper to the elbow so that I can control the flow of air in the cabinet. I can shut airflow off completly when not in use. This duct comes out and runs behind the other cabinet tying in. I'm getting ahead of myself. Here is the duct leaving the C-13 and heading behind the larger cabinet.
It runs behind the larger cabinet.
And T's into the duct run coming out of the larger cabinet containing the 600.
Here is the penetration on the larger cabinet I built. Notice the handle? That is also an air damper allowing me to fine tune the airflow. I can easily find a perfect balance for both cabinets and maximize efficiency.
Here it is tying into my fan. I use my fan to suck air. I do this so that any air leaks will be SUCKING in air from the room the cabinets sit in. NOT BLOWING STANK air everywhere. I work with these types of blowers in my trade often and the are horses. They seldom break and can be used however you need to use em.
I took the cushion off a chair I seen on the curb and laid my scrubber on top. Not blocking any airflow. I rest it right underneath my A/C so that in the summer, the hot air is immediately removed and I seperated it as you see here. It makes a huge difference as most all of the hot air is sucked in through the return and cooled. Also, the A/C's temperature sensor that controls the thermostat generally operates off what temperature is coming out of my ducts. Mountain Aire scrubber. Expensive. Works.
Here is the intake setup on the 600 cabinet. It was specially designed and took alot of thought. I ended up stacking 3 accordian doors that were cut, assembled in opposite directions, painted black on the inside. These are also filtered using the same monopleated 20X20X1 filters shown earlier.
Here is what the intakes look like on the inside. They do not leak ANY light whatsoever.
Here is where the air is sucked out of. I also sealed the hood with glass.
I attach the other end to a piece of 6" flex and that leaves the cabinet into the elbow down, T ing into the rest as shown earlier.
That was for all you interested in my ventilation setup. I take pride in it as I have adapted to my surroundings well. I like the fact I can cool two cabinets with one fan. This is currently my pride and joy, but it is nothing compared to what you will see in the future from me...
DIY Vegetation and Cloning Center
DIY Vegetation and Cloning Center
I'm also proud of this. It cost me whatever the Slimboyzz 6 X 24w fixture. The vented shelf was free from work. Scored it from a job it was junk. Garbage bags, nylon ties, tape was all scored from work as well. I had 2 PC fans and alway have a bunch of 12V DC "power packs" on hand. Check it...
This is it closed. It is light proof and also has a filtered intake.
Here is the intake. A little setup with some filter material for good measure.
Here she is opened up. The top has the Slimboyzz 6 X 24w. And the bottom is simply 2 24 watt floro strips.
This is the exhaust. It's mounted with zip ties. Simple and very effective.
This is the other fan. I tension mounted it with zip ties at just the right level. It works perfectly giving them the right breeze they need.
Here is the bottom shelf with some SSH seedlings. Behind them you can see the intake penetration on the inside...
Here's what the tops doing. Moms and some cuts.
These small fans are all that is need to keep the plants happy and temps good. My ambient temperature in the room is 70F.
I can lower temperature in the room and affect the temps in the boxes.
I can adjust dampers and affect the temperature in the cabinets AND the balance of airflow in each cabinet. Therefore I can adjust temp in one cabinet and not the other.
I can remove heat with the A/C.
I can add heat with the house's heating system.
I can add humidity with the ultrasonic cool misters.
I can remove humidity with a dehumidifier. (never needed, but have it)
I love playing God in my room!
DIY Vegetation and Cloning Center
I'm also proud of this. It cost me whatever the Slimboyzz 6 X 24w fixture. The vented shelf was free from work. Scored it from a job it was junk. Garbage bags, nylon ties, tape was all scored from work as well. I had 2 PC fans and alway have a bunch of 12V DC "power packs" on hand. Check it...
This is it closed. It is light proof and also has a filtered intake.
Here is the intake. A little setup with some filter material for good measure.
Here she is opened up. The top has the Slimboyzz 6 X 24w. And the bottom is simply 2 24 watt floro strips.
This is the exhaust. It's mounted with zip ties. Simple and very effective.
This is the other fan. I tension mounted it with zip ties at just the right level. It works perfectly giving them the right breeze they need.
Here is the bottom shelf with some SSH seedlings. Behind them you can see the intake penetration on the inside...
Here's what the tops doing. Moms and some cuts.
These small fans are all that is need to keep the plants happy and temps good. My ambient temperature in the room is 70F.
I can lower temperature in the room and affect the temps in the boxes.
I can adjust dampers and affect the temperature in the cabinets AND the balance of airflow in each cabinet. Therefore I can adjust temp in one cabinet and not the other.
I can remove heat with the A/C.
I can add heat with the house's heating system.
I can add humidity with the ultrasonic cool misters.
I can remove humidity with a dehumidifier. (never needed, but have it)
I love playing God in my room!
real nice walk thru of ur areas bro.you have really thought out ur spaces and have them runnin efficient as can be yo.i think the veg/mom cab is slick as oil yo,cheap and effective,be proud yo.
thanks for lettin us see the inner workings of ur set up man.peace-T-
thanks for lettin us see the inner workings of ur set up man.peace-T-
hey ART, nice lookin setup you got going. What brand of fluoro is that your using on the top shelf for veg? It looks like its no wider than 3 ft. I can't find them anywhere like that? Please enlighten me. Or anyone else know where to get a short fluoro for mothers and clones?
First Day of Flower
First Day of Flower
These were taken about 4 days ago.
I've been taking a pic everyday after the change in light schedule. They are getting healthier and healthier every day. They have overcome the N deficiency and are back on track. I'll post those pics in a few days.
First Day of Flower
These were taken about 4 days ago.
I've been taking a pic everyday after the change in light schedule. They are getting healthier and healthier every day. They have overcome the N deficiency and are back on track. I'll post those pics in a few days.
