SMOKINGBUDDAH said:thunderkel please make a write up thread for the unexperience![]()
Ok here we go!! First I would like to thank MajPothead for answering my pm's and giving me my shopping list ... I put my own touch on it
I use a Bubble Bar instead of airstones with a T adapter and I keep it clear cuz from other threads around here I've seen it doesn't make a difference if it's blacked out or not, some say algae grows but not if you change the water every 2 days....
On with the list that I got from MajPothead
1 each 1 gal rubbermaid brand tote approx 3$(I used a 2.5 liter Ziplock Container)
1 each 10 gal cheapy fish tank air pump approx 6$
1 pack air hose for air pump approx 2$
1 pack of 4 T's for the air hose approx 2$
2 packs 2 each small air stones 1$ a pack.(I got these and a 5" Bubble Bar)
all the above supplies can be bought at any local walmart kamart or pet supply store.
i took and drilled 15 evenly spaced 1/2inch holes in the lid of the rubbermaid.
i took 1 T made small hole and pushed 1 side through the lid some inside most outside of container.
i cut 1 length of hose to go from bottom of T through lid to center bottom of the cloner.
i placed 1 t there to off shoot to each side of container again evenly cut lengths of hose to reach the sides.
1 placed on each side the last 2 T's to run again evenly cut lengths of hose to each corner of cloner.
i attach all air hose to perspective spots and put air stones on .
2 ends of the T protrude from the lid i caped 1 side off and connected the air pump to other n/p.
and whalla DYI 15 site clone bubbler for approx 20$
here are the pics of mine being put together
Get container
![](https://www.icmag.com/gallery/data/500/53078Picture_445-thumb.jpg)
Cut 15 Dime sized holes in the lid
![](https://www.icmag.com/gallery/data/500/53078Picture_442-thumb.jpg)
Get Foam of some kind (pool toys are great)
![](https://www.icmag.com/gallery/data/500/53078Picture_443-thumb.jpg)
Cut 15 round pieces split to look like Pac Man to hold cuttings in place
![](https://www.icmag.com/gallery/data/500/53078Picture_438-thumb.jpg)
Fill holes in lid with foam pieces
![](https://www.icmag.com/gallery/data/500/53078Picture_439-thumb.jpg)
Fill container with room temp water and connect your pump to the Bubble Bar with air hose
![](https://www.icmag.com/gallery/data/500/53078Picture_440-thumb.jpg)
Now fill your new Bubble Cloner with cuttings and leave it be for 7 - 21 days(depending on strain)
![](https://www.icmag.com/gallery/data/500/53078Picture_394-thumb.jpg)
![](https://www.icmag.com/gallery/data/500/53078Picture_395-thumb.jpg)
You will end up with happy clones like this!!!
![](https://www.icmag.com/gallery/data/500/53078Picture_437-thumb.jpg)
Thats how I made mine I used MajPotheads list and found out I didn't need all of it for the size container I had and I still got the 15 sites so I just made 2 of them and the Bubble Bar I bought just for the hell of it not knowing it was all I needed for my 2.5 Liter Ziplock Food Container..... Enjoy
![Jump :jump: :jump:](/data/assets/smilies/jump.gif)