G
greenmatter
been lurking the vert section for a while now ...... gotta jump in over your head at some point, so here goes.
that box has my carbon filter and all my ballasts in it. i built it so it would pull all of the air from the top of one end of the room. that elbow you see will eventually run back out of the room and put heat back into the house (winter mode) now it is just attached to a directional damper i built so it is dead. all the duct is solid except about a foot of flex that isolates the vibration of the fan from the rest. of the system.
yes solid duct is a pain in the ass, on the other hand ask bobby stainless if a port and polish is worth the time. same thing different scale.
the control buckets for the ebb and flow system. yes 4 is overkill but if i own em i am gonna use em.
row of res barrels on the other side of the wall
my light balancer. the bulbs are only 3.5 feet apart but the move up and down over 4 feet. i used the big pulleys because an electrician friend of mine gave me some good advice, i will share that later
proof that i read one or two things in marlo's thread.
gotta get this on before the computer dumps it again ... more later
that box has my carbon filter and all my ballasts in it. i built it so it would pull all of the air from the top of one end of the room. that elbow you see will eventually run back out of the room and put heat back into the house (winter mode) now it is just attached to a directional damper i built so it is dead. all the duct is solid except about a foot of flex that isolates the vibration of the fan from the rest. of the system.
yes solid duct is a pain in the ass, on the other hand ask bobby stainless if a port and polish is worth the time. same thing different scale.
the control buckets for the ebb and flow system. yes 4 is overkill but if i own em i am gonna use em.
row of res barrels on the other side of the wall
my light balancer. the bulbs are only 3.5 feet apart but the move up and down over 4 feet. i used the big pulleys because an electrician friend of mine gave me some good advice, i will share that later
proof that i read one or two things in marlo's thread.
gotta get this on before the computer dumps it again ... more later