Supersized NGB Style Grow Cab

[Anonymous7o2]

hello all,
tha name is mAc, i'm finally got all my gear collected, n my box built but not completed. i'm open to opinions, n comments to improve my setup. i'm not very good with intro, soo i'll just get right to it...
tha Grow environment:
NGB style cab but supersized
7 feet tall, 7 feet long, n 3 feet deep

flower section is 7ftHx4ftLx3ftD
veg(mother/clones) section is 3ftHx3ftLx3ftD
utility section 2ftHx3ftLx3ftD
intake/air section 2ftHx3ftLx3ftD


box was framed with 2x4 then i used 7/16 osb plywood to wall it up, caulked up all the seams n cracks, n paint my interior grow sections white...

tha Grow Gear:
Light- 800Watt Sun Systems Vii (400hps + 400Mh on 1 ballast)
1x 4 bulb Sunleaves Pioneer Jr. T5
2x 2 bulb Sunleaves Pioneer Jr. T5
Fans- 2x 6inch Vortex 449cfm
Filter- 1x Can Filter 66
1x Can Filter 33
A/c unit-5,000 btu kenmore
6x 5 gal. black buckets w/ 6inch net pot lids
20lb. Co2 tank w/ emitter
Advanced Nutrients sensi grow n bloom with some bigbud
600gph Sunleaves Air Pump
n some other random essientials needed to grow with.

tha Seeds:
got some mixed indoor strains from BC buddepot, n Nirvana going right now in some soil mix(15 seedlings), still gotta sex them n pull the males n keep tha moms
then i got Nirvana's White Widow seeds waitin to be germed, once i got my enviornment perfected.

tha Plan:
i wanna go with a simple bubble bucket system for now till i can get all the parts need for my Recirc-Dwc. i wanna go with 6 of the 5 gal buckets in the flowerside. i wanna try n get a harvest every 2 months. need to build a bubble cloner, already got my veg tub setup.

tha Pics:......

 

[Anonymous7o2]

more pics....

 

[Anonymous7o2]

tha last bit....

 

[Anonymous7o2]

some new pics of the progress being made....

 

[Anonymous7o2]

more pics coming... min 4 upload at a time >.< .... lame...

 

[Anonymous7o2]

last two ....

 

[JamieShoes]

DANG! that thing is BIG! :smile:

I was trying to work out how "supersized" when I realised that was your garage door next to it.... (although it does also say "7 feet tall, 7 feet long, n 3 feet deep")


top work feller :smile:

glad you got the fotos to work. plants are looking lovely and healthy. Be careful with that proximity though, if you don't keep an eye on your humidity, you might get mold or mildew problems :smile:

 

[free radical]

Looks very promising. Nirvana has some great stuff, good luck finding a couple of nice pheno's. What are you doing for a door or doors?

 

[Anonymous7o2]

cutting double doors on hinges for easier access to the plants sections, with magnetic catches, n "tot-locs" for my locks pretty stealthy, the electrical n air/intake section are gonna be on magnetic cathes n pull knobs no hinges, everything will be lined with foam weatherstrip for sealing it up. gotta cut my 6inch exhaust vent holes still, n light barrier my inside a bit more, got some leaks from the veg/to flower sections, setup my bubble bukets hang the lights n filters, then test run its for 24 hours n then it should be ready for the plants. big couple of days ahead of me.....

oh n i pulled the 1st male out of the group ... leaves me with 14 now... keepin my fingers crossed


mAc

 

[nekoloving]

c-c-c-COMBO BREAKER!!1ONE

c-c-c-COMBO BREAKER!!1ONE

er - somehow i double posted while trying to edit - clearing this post =[

 

[nekoloving]

c-c-c-COMBO BREAKER!!1ONE

c-c-c-COMBO BREAKER!!1ONE

hello all,
tha name is mAc, i'm finally got all my gear collected, n my box built but not completed. i'm open to opinions, n comments to improve my setup. i'm not very good with intro, soo i'll just get right to it...
tha Grow environment:
NGB style cab but supersized
7 feet tall, 7 feet long, n 3 feet deep

flower section is 7ftHx4ftLx3ftD
veg(mother/clones) section is 3ftHx3ftLx3ftD
utility section 2ftHx3ftLx3ftD
intake/air section 2ftHx3ftLx3ftD


box was framed with 2x4 then i used 7/16 osb plywood to wall it up, caulked up all the seams n cracks, n paint my interior grow sections white...

tha Grow Gear:
Light- 800Watt Sun Systems Vii (400hps + 400Mh on 1 ballast)
1x 4 bulb Sunleaves Pioneer Jr. T5
2x 2 bulb Sunleaves Pioneer Jr. T5
Fans- 2x 6inch Vortex 449cfm
Filter- 1x Can Filter 66
1x Can Filter 33
A/c unit-5,000 btu kenmore
6x 5 gal. black buckets w/ 6inch net pot lids
20lb. Co2 tank w/ emitter
Advanced Nutrients sensi grow n bloom with some bigbud
600gph Sunleaves Air Pump
n some other random essientials needed to grow with.

tha Seeds:
got some mixed indoor strains from BC buddepot, n Nirvana going right now in some soil mix(15 seedlings), still gotta sex them n pull the males n keep tha moms
then i got Nirvana's White Widow seeds waitin to be germed, once i got my enviornment perfected.

tha Plan:
i wanna go with a simple bubble bucket system for now till i can get all the parts need for my Recirc-Dwc. i wanna go with 6 of the 5 gal buckets in the flowerside. i wanna try n get a harvest every 2 months. need to build a bubble cloner, already got my veg tub setup.

tha Pics:......

[edited to manually multiquote]

cutting double doors on hinges for easier access to the plants sections, with magnetic catches, n "tot-locs" for my locks pretty stealthy, the electrical n air/intake section are gonna be on magnetic cathes n pull knobs no hinges, everything will be lined with foam weatherstrip for sealing it up. gotta cut my 6inch exhaust vent holes still, n light barrier my inside a bit more, got some leaks from the veg/to flower sections, setup my bubble bukets hang the lights n filters, then test run its for 24 hours n then it should be ready for the plants. big couple of days ahead of me.....

oh n i pulled the 1st male out of the group ... leaves me with 14 now... keepin my fingers crossed


mAc

hey man thats PERFECT! literally EXACTLY what i'm looking for!
mind posting a shopping list?

 

[Anonymous7o2]

Can-Filter 33 x1=$99.95
CAN-Filter - Can-Filter Flange x2=$21.90
CAN-Filter - Can-Filter 66 x1=$159.95
HID5M Hanna - Hanna EC/TDS/Temperature Waterproof Pen x1=$118.95
Sunleaves - 4 Bulb T5 Fixture x1=$129.95
Sunleaves - 2 Bulb T5 Fixture x2=$189.90
Hortilux - 400w Hortilux HPS Bulb x1=$69.95
Hortilux - Hortilux Blue 400w M.H. Horizontal Bulb x1=$99.95
Light Lifter Pair x1=$14.95
C.A.P. - TMP-1 Cooling Thermostat x1=$59.95
C.A.P. - CO2 Regulator/Emitter x1=$154.95
C.A.P. - 20 lb Aluminum CO2 Tank x1=$134.95
1/2'' Poly Drip Tubing Roll of 100 Ft x1=$14.95
1/4'' Black Vinyl Tubing Roll of 50 Ft x1=$5.95
(10) 1/4'' Barbed Connectors x1=$1.95
Manual Hole Punch x1=$2.95
1/2'' Poly End Plug x1=$1.95
9' Three Outlet Extension Cord x3=$17.85
8' Power Stripx3=$20.85
Advanced Nutrients - SensiGrow Part A 4 Liter x1=$22.95
Advanced Nutrients - SensiGrow Part B 4 Liter x1=$22.95
Advanced Nutrients - SensiBloom Part A 4 Liter x1=$22.95
Advanced Nutrients - SensiBloom Part B 4 Liter x1=$22.95
Advanced Nutrients - Big Bud 1 Liter x1=$26.95
Advanced Nutrients - Jumpstart 1 Liter x1=$14.95
3 1/2 Gallon Bucket x6=$26.94
5 Gallon Bucket x6=$32.94
6'' Net Pot Bucket Lid x6=$23.70
Fox Farm - Light Warrior Grow Medium x1=$17.95
Perlite .4 Cubic Ft Bag x1=$3.95
1.5'' x 1.5'' x 1.5'' Wrapped Cube Pack of 45 x1=$6.95
Mylar 2 mil - 25' x1=$29.95
Sunleaves - OxyStone 4 x10=$19.50
Sunleaves - O2 Easy High Output Air Pump x1=$35.95
Fox Farm - Grow Big Quart x1=$15.95
60 ml Measuring Syringe w/Tube x1=$4.95
Intermatic 15 minute Grounded Timer x2=$27.90
C.A.P. - Blower Speed Control x2=$59.90
6" to 4" Ducting Reducer x2=$21.90
6'' Flexible Duct 25' x1=$22.95
Foil Tape 2'' x 150' x1=$14.95


Subtotal: $1,831.78
Tax: $0.00
Shipping: $142.98
Grand Total: $1,974.76

Plus
5,000 btu Kenmore Window A/c unit x1=$99.99
6" 449cfm Vortex Inline Fans x2=$139.99
31" Oscillating Tower Fan x3=$109.95
4" Cool Air Fittings x2=$23.09
800 watt (400hps + 400mh) Super Sun System Vii x1=$535.95
7/16 OSB Plywood 4x8 Sheet x9=$21.95
2x4x8 Framing Studs x12=$22.95
Foam weatherstrip x4=$25.95
Clear Chaulk x6=$7.98
Tot Locs Magnetic Locks x1=$22.95
Wheel Ball Caster x4=$32.95
Door Knobs x8=$9.59
Door Hinges x8=$11.75
Magnetic Catches x16=$18.98
Flat Base White Paint x1=$5.95
Ultra White Paint x1=$7.95


TOTAL So FAR: $3072.68 usd

 

[Anonymous7o2]

quick update, i've confirmed 7 females, tossing the others, no pics yet, loaned my camera out >.< should have pics this weekend, going to be cloning the tops of my girls, n gonna be vegging till about the roots come out of the bottom of my rockwool cubes n off to flower they go.

 

[nekoloving]

quick update, i've confirmed 7 females, tossing the others, no pics yet, loaned my camera out >.< should have pics this weekend, going to be cloning the tops of my girls, n gonna be vegging till about the roots come out of the bottom of my rockwool cubes n off to flower they go.

a. THANX SO MUCH FOR LIST!!! +REP

b. congrats on the harem! considered growing one male of the bunch out? just to keep a little pollen on hand to cross back with?

c. be safe with it - LOOOOOVE the setup~!~.

d. where's pontiac when you need him, this should be in the diy thread

 

[Anonymous7o2]

thanks for the replies,

neko,
i'm not going to be keepin any males for right now, still need to get some growing experience under my belt, (only have 1 outdoor grow) that ended up terrible, cut them down too early n cured them too fast ended up with some "grass trimmings" smelling bud that burnt like pop rocks, n tasted like crap....LoL good thing it was bagseed. anyways so this grow is going to be my 1st (REAL) grow, hoping its works out, my wife is still mad about my spending for this little investment of mine

 

[Anonymous7o2]

permalink
Got 7 Health Fat Mothers, 6 clones showing roots after 1 week in the bubbleponics system, haven't gotten much done with the box, busy couple days around here, anyways here some pics

 

[Anonymous7o2]

.....more pics.....

 

[Anonymous7o2]

......... .....

 

[nekoloving]

looks like it's really coming together there for you!

 

[Anonymous7o2]

UPDATE TIME!!!

so the clones are looking good n healthy, got 1 lazy biotch that hasn't rooted thru the netcup, so 5 of my 6 girls are ready to move over to bloom, box is almost done!!! Finally it feels like i've been workin on this project for years!! LoL from the research, planning, drawings, equipment researching, forum Lurking, saving the $$$$, Google SketchUp Design, Saving more $$$$, (lol) Research RESEARCH N Research!, n finally its ALmost OVeR!!
Can't wait to see how my results are going to be, so much waiting ! Anyways not to keep you waiting here tha pics!! ENJOY