What's new

Diary SQMW & LHMW FC3000

Uzsidoboz

Well-known member
Hi.
I received seeds as a gift
thanks again @WHIPEDMEAT
3-3 seeds have been started if the wallet allows I will pick clones and select them later.
The set up will change as far as moving the party to 1 tent more unfortunately I don't know if I can run it.

Tent: Mars Hydro 100x100x180

100x100x180: https://www.mars-hydro.com/39x39x71-1680d-grow-tent


Lighting: Mars Hydro FC3000

FCE-3000: https://www.mars-hydro.com/fc-e3000-led-grow-light

Air handling: 325m³ tube fan added to CAN-Lite 425m³ , 5pcs 12cm pc valves for internal air mixing

Medium: washed coconut 70% perlite 30%

Automatic RunToWaste feeds it even boils itself this is my first nail using an automatic watering system.

Feeding: Ferti4 +CaN+CaN+Crystalline salt + H2O2
I thought of hydrogen peroxide and algae.
The water will either be my well water or I'll push it through the Ro filter if I can make it work.

Day 1
IMG_20220719_175647.jpg

Day 7
IMG_20220726_171057.jpg
 
Last edited:

Uzsidoboz

Well-known member
Day 16

I had a problem with the coconut again and had to fix it and then took it out and replanted it and that's the situation they are getting themselves together.

Fuck I didn't put perlite on the coconut, you weed fuck!
The root system rotted, it was standing in the water the whole medium was root system but rotted.
Perlite should not be left out!

Lighting works well at 10%.
20/4h humidifier going 85% rh kept stable at 29C°
I turned off the sprinkler until they recovered they had barely any intact root system I have hand watered so far
Feed: F4 0.8 CaN 0.6 MgSo4 0.2 Leaf spray 1500 ppmWuxal another solution of CaN Bitter Salt also 1500ppm .

I drained 220L of RO water feeding through my well so I got 40ppm of clean water , anyone who asks I can push more nutrient solution keeping Ec levels low until they are strong then tap water .
It may take a little longer to veg but I think it will be fine.

IMG_20220805_181056.jpg

Day 24
IMG_20220813_093928.jpg
 
Last edited:

Uzsidoboz

Well-known member
They're on the move!
Ec: 1.5
Ph: 5.8-6
Nutrient: F4 0.8 CaN 0.7 MgSo4 0.4 + SiO3 0.5g / plant base
Light 25%
08.26
IMG_20220826_120512.jpg

09.04
IMG_20220904_121712.jpg
 

Uzsidoboz

Well-known member
I think it is blooming 3weeks ago I switched.
F4: 1
CaN: 0.5
MgSo4: 0.3
Light: 75%
Watering: 4h/4s
I reduced the cant because the mg deficiency stretched long past I also reduced the fertin and increased it
The liberty is really bursting forward energetic every day I twist it but the next day it's like a peg .
And the specqueen has grown stalks as thick as a pinky and not elongated I hope the nutrient composition is good for both because as soon as I took back the N the ends of the finger shoots started to yellow.
IMG_20220917_120430.jpg
IMG_20220917_120401.jpg
IMG_20220917_120351.jpg
 
Last edited:

Uzsidoboz

Well-known member
I have 1 comment about the feeding I went with low ec 1.6 4 days ago they had enough 1.5 drain flowing out ph now 6.2 , and the watering water is 6.3
But today I waited 2 waterings and put the drain in and measured the Ec at 1.07 and then increased it to 1.8 and the watering system ran for 10min and then I measured 1.3
I increased the nutrient concentration even more to 2.1
However, I did not start this
In the morning we'll see how much is the right amount for SOLON
 

Uzsidoboz

Well-known member
10.06
IMG_20221006_181503.jpg
LibertyMalawi smells like cool strawberry gum


IMG_20221006_181521.jpg

Specialqueen I'm still analysing this but I haven't found out yet, but it's such a solid beauty
IMG_20221006_181530.jpg
 

Uzsidoboz

Well-known member
10.16
Here you can see the nitrogen overfeed is nicely stored and I'm trying to wash it out
IMG_20221016_183416.jpg
IMG_20221016_183449.jpg
IMG_20221016_183721.jpg
IMG_20221016_183736.jpg
 

Attachments

  • IMG_20221016_183659.jpg
    IMG_20221016_183659.jpg
    3.1 MB · Views: 57
Last edited:

Uzsidoboz

Well-known member
10.23
Looks like the nitrogen is still too much for the right LibertyMalawi , but apart from that it is moving forward .
The led on the lower part is also giving the little popcorns a nice puff :D
IMG_20221023_190903.jpg
IMG_20221023_190923.jpg
IMG_20221023_185838.jpg
IMG_20221023_190028.jpg
IMG_20221023_190047.jpg
IMG_20221023_190723.jpg
 

Uzsidoboz

Well-known member
10.27
Our fat is finally spreading the bodywork is swelling the nipples although this is only noticeable on the specqueen
Due to all the rain and fog the humidity outside is very high, fortunately it doesn't bother me
From lamp out 22-23C° 50-55Rh
At night 16-18C° 55-60Rh
Feed: 1.2 f4 0.5 CaN 0.3 MgSo4 silicate
IMG_20221104_151157.jpg
IMG_20221104_151213.jpg
IMG_20221104_151139.jpg
IMG_20221104_151123.jpg
IMG_20221104_151107.jpg
IMG_20221104_151321.jpg
IMG_20221104_151309.jpg
 
Last edited:

exploziv

pure dynamite
Administrator
Veteran
Looking good, brother! But I had to get high, sleep a bit, then came back for the high resolutions pics to load! :joint:
:lurk:
 
Top