I like to start my temps cooler in the beginning and slowly increase the temps just like Mother Nature does. Working my way up to 80 degrees, but with a very low humidity.What y’all like ??
Been hovering 75-79f 62-65%
Yes no ?!
Ak47
1/3 has sprouted from earth day 4 since paper towel. Also how many days in seedling til I flip to veg ??
Currently running190/200 ppfd
Interesting still 1 of 3 has popped out the soilI like to start my temps cooler in the beginning and slowly increase the temps just like Mother Nature does. Working my way up to 80 degrees, but with a very low humidity.
Using Promix hpYou can raise yor temp with a sterilized cover or a cloning tray. Add a good amount of perlite to your soil and you won't over water. I've used pure perlite and just dunk the solo cup daily like hydroponics,you could buy a cheap moisture meter if you are unsure,it's good to have loose medium when they are fragile. Best of luck
I would dig down and see if they are growing up side down.Interesting still 1 of 3 has popped out the soil
All 3 cups always feel heavy havnt watered daily either…. Wondering i plopped the seeds to deep…… wondering if there was too much water…..
Have a heating Mat on 3/4 max
At night I can’t get it higher than 71/72F
Thinking of digging out the 2 that havnt sprouted from the soil n see what’s up we are on day 5..,.
Currently hovering 180-210 ppfd
Any tips greatly appreciated
That’s exactly what I’m thinking they move sideways or upside down the one sprouted strong isn’t center anymore in the cup eitherI would dig down and see if they are growing up side down.
If the soil is staying wet and you think it's a problem.perlite will fix that. It depends on my temp ,if it's winter I use a dome until they break surface to keep the temp consistent and any drafts away .I have a bunch of trays and stack them if it's too warm on the mat or put a towel or something under the tray ,you can also buy a controller for your mat with probe,it's handy for clones as well . I just have a $10 moisture meter with dry ,moist,wet on it and probe in many spots,after a while you won;t need the meter and can tell by pot weight. I buy one bale of promix and a big green bag of perlite and mix them together . After drenching it squeeze some in your hand and see if it crumbles nicely without dripping