ReikoX
Knight of the BlackSvn
The Ghost Toof x SBR autos are taking off now.. I transplanted them from their cups into their final home. They were a little dry and I wasn't as gentle as I had hoped to be, but they shouldn't skip a beat. I watered everything in with recharge.
Spent some time working on the driver cabinet. I got the hinges mounted and tested the door. I went with two hinges instead of three. The hinges are rated for 12.5 pounds each, and I am at about 25-30 pounds with the drivers. Adding a latch to the other side should make up for what ever extra weight I may have. The frame is mounted using some corner braces. The braces are secured to the studs on the right and with toggle bolts on the left.
Finally, I laid out the drivers on to mount on the outside of the door. The drivers all have a 1" gap between them. This spaces them evenly and allows for airflow. Once I mark everything, I'll drill holes through it.
Spent some time working on the driver cabinet. I got the hinges mounted and tested the door. I went with two hinges instead of three. The hinges are rated for 12.5 pounds each, and I am at about 25-30 pounds with the drivers. Adding a latch to the other side should make up for what ever extra weight I may have. The frame is mounted using some corner braces. The braces are secured to the studs on the right and with toggle bolts on the left.
Finally, I laid out the drivers on to mount on the outside of the door. The drivers all have a 1" gap between them. This spaces them evenly and allows for airflow. Once I mark everything, I'll drill holes through it.