DjHigherThenU
New member
I've seen some conflicting posts on how exactly Phsan20 is used.
My plants have a brown algae problem and need want to eradicate the problem. They're in a Aeroponics set up. The conflicting posts include
Use Physan20 at 1mL per 10 gallons to sterilize and clean---Posted by RichyRich. And Rich posted:You can run it through a hydro system with plants in it. Run through system for no more than 6 hours, dump, flush and then make new rez. That is how you sterilize your system.
Then i saw a post by Imaginaryfriend stating: 1 – Add Physan20 to your existing tank at a rate of one teaspoon per 15 gallons of reservoir. This comes out to 1ml of Physan20 for every THREE gallons in your tank. So divide your tank gallon capacity by 3, then add that many ml of Physan20. Run this tank for 3 days. Groovy set up a wholesale account with the manufacturer of Physan20 after we had a nice chat with the owner of that company. They are only 5 miles away from our office. We didn’t pull any punches, we asked what the application rate for MMJ Hydroponic reservoirs would be. The owner let us know that although Physan20 is a poison, in the dilution he recommended it would NOT be toxic to the plants.
Furthermore, he let us know that Physan20 biodegrades into NITROGEN in 3 to 7 days depending on the tank conditions. Therefore he stated that plants will not concentrate and store the toxic elements of Physan20 and will pose no threat upon consumption of the MMJ Crop. For this reason we recommend running the initial dose 3 days, then draining the reservoir to eliminate any traces of Physan to ease your mind, and also to clear out any dead organic matter such as dead algae, fungus, bacteria, and dead root matter.
2 – Mix up a fresh reservoir of your regular nutrient schedule. Lastly, add in 2ml of Hydro-Fungicide per Gallon of your new reservoir. Add the same ratio to any top-off water you add, and replenish the full amount once a week if you haven’t changed your reservoir out yet.
So 6 HOURS or 3 DAYS?
ALSO I want to use this stuff in my ebb and flow trays. Is there any difference in how you should use?
heres a pic of one of the plant's roots in a areoponics setup: Thanks for the help
My plants have a brown algae problem and need want to eradicate the problem. They're in a Aeroponics set up. The conflicting posts include
Use Physan20 at 1mL per 10 gallons to sterilize and clean---Posted by RichyRich. And Rich posted:You can run it through a hydro system with plants in it. Run through system for no more than 6 hours, dump, flush and then make new rez. That is how you sterilize your system.
Then i saw a post by Imaginaryfriend stating: 1 – Add Physan20 to your existing tank at a rate of one teaspoon per 15 gallons of reservoir. This comes out to 1ml of Physan20 for every THREE gallons in your tank. So divide your tank gallon capacity by 3, then add that many ml of Physan20. Run this tank for 3 days. Groovy set up a wholesale account with the manufacturer of Physan20 after we had a nice chat with the owner of that company. They are only 5 miles away from our office. We didn’t pull any punches, we asked what the application rate for MMJ Hydroponic reservoirs would be. The owner let us know that although Physan20 is a poison, in the dilution he recommended it would NOT be toxic to the plants.
Furthermore, he let us know that Physan20 biodegrades into NITROGEN in 3 to 7 days depending on the tank conditions. Therefore he stated that plants will not concentrate and store the toxic elements of Physan20 and will pose no threat upon consumption of the MMJ Crop. For this reason we recommend running the initial dose 3 days, then draining the reservoir to eliminate any traces of Physan to ease your mind, and also to clear out any dead organic matter such as dead algae, fungus, bacteria, and dead root matter.
2 – Mix up a fresh reservoir of your regular nutrient schedule. Lastly, add in 2ml of Hydro-Fungicide per Gallon of your new reservoir. Add the same ratio to any top-off water you add, and replenish the full amount once a week if you haven’t changed your reservoir out yet.
So 6 HOURS or 3 DAYS?
ALSO I want to use this stuff in my ebb and flow trays. Is there any difference in how you should use?
heres a pic of one of the plant's roots in a areoponics setup: Thanks for the help
Attachments
Last edited: