Welcome to my grow!
Setup:
I don't have the exact dimensions of the case, it is roughly ~21in. height x ~24in. width x ~6in. depth. The depth is what was killing me because a lot of the containers I had available didn't fit but I eventually found a perfect sized clay pot to go in there. Also, I have one exhaust fan and plenty of open holes for passive intake. Temps hopefully won't be a problem, the surrounding area isn't very hot at all. It's also pretty light proof for the most part, I have it under a desk so it doesn't really matter.
Seeds: Lowlife's Auto Blueberry - ordered from Sensible Seeds
Soil: Miracle gro Potting Mix
Lights: 1x 125 Watt CFL (I have both 6500k and 2700k that I will switch when needed)
Nutrients: Miracle gro Bloom Booster 15-30-15 (Will be used very, very lightly about 3.5 weeks in.)
pH Kit: General Hydroponics pH Control Kit (Liquid Drops)
Light Schedule: 19/5
Let me just say I fully understand that Miracle gro is not the best choice but it is all that's available to me right now so don't recommend to me fox farms or advanced nutrients, I know they're the best to use. Soil is soil and I figure that if i take care of them properly i should have no nute burn problems Before I put the seed in the soil, I flushed it quite a bit so the plant hopefully wont burn!
Day 1
1.) Case with the lights on. The reason some of it is aluminum reflective tape and part white paper is because i ran out in the middle of building it and was too lazy to get more, cut me some stoner slack haha.
2.) Pc fan - exhast. not sure how strong it is, kind of loud but not too loud.
3.) Case with light off.
4.) First pot with one seed - if you look hard in the middle you can see its popping up..I saved it! thats the one that dried out pretty bad but its making a nice recovery.
5.) The case with everything in and set up.
any comments suggestions..
Setup:
I don't have the exact dimensions of the case, it is roughly ~21in. height x ~24in. width x ~6in. depth. The depth is what was killing me because a lot of the containers I had available didn't fit but I eventually found a perfect sized clay pot to go in there. Also, I have one exhaust fan and plenty of open holes for passive intake. Temps hopefully won't be a problem, the surrounding area isn't very hot at all. It's also pretty light proof for the most part, I have it under a desk so it doesn't really matter.
Seeds: Lowlife's Auto Blueberry - ordered from Sensible Seeds
Soil: Miracle gro Potting Mix
Lights: 1x 125 Watt CFL (I have both 6500k and 2700k that I will switch when needed)
Nutrients: Miracle gro Bloom Booster 15-30-15 (Will be used very, very lightly about 3.5 weeks in.)
pH Kit: General Hydroponics pH Control Kit (Liquid Drops)
Light Schedule: 19/5
Let me just say I fully understand that Miracle gro is not the best choice but it is all that's available to me right now so don't recommend to me fox farms or advanced nutrients, I know they're the best to use. Soil is soil and I figure that if i take care of them properly i should have no nute burn problems Before I put the seed in the soil, I flushed it quite a bit so the plant hopefully wont burn!
Day 1
1.) Case with the lights on. The reason some of it is aluminum reflective tape and part white paper is because i ran out in the middle of building it and was too lazy to get more, cut me some stoner slack haha.
2.) Pc fan - exhast. not sure how strong it is, kind of loud but not too loud.
3.) Case with light off.
4.) First pot with one seed - if you look hard in the middle you can see its popping up..I saved it! thats the one that dried out pretty bad but its making a nice recovery.
5.) The case with everything in and set up.
any comments suggestions..