ok so i will be re building my growbox soon and i wanted to ask a few questions..
first i will start with the drawings of the new box then ask the questions
the grow area is the big white one and it has the dimensions of 33"wide/38"tall/24deep
the white cylinder is the S&P 100x 4" fan
and the black is a carbon filter
i was wondering if that fan would be enough to cool a 250watt mh or 250watt hps i use the sunsystems supersun reflector and it has the glass and everything with the 4" duct adapters i will use 4" thermoflo ducting and light tight 8x8 louver
also i already have the botanicare microgarden hydro system so i will be installing the res down in the bottom chamber and the tray will sit all the way down with the top lip of the tray on the bottom of the gro chamber.
also... the front i need help with hinges.. and doors and such i dono how im gona make light tight..
i will be doing scrog at a good height
any comments or questions would be very appriciated also i will prob start a diary soon for the box build!
first i will start with the drawings of the new box then ask the questions
the grow area is the big white one and it has the dimensions of 33"wide/38"tall/24deep
the white cylinder is the S&P 100x 4" fan
and the black is a carbon filter
i was wondering if that fan would be enough to cool a 250watt mh or 250watt hps i use the sunsystems supersun reflector and it has the glass and everything with the 4" duct adapters i will use 4" thermoflo ducting and light tight 8x8 louver
also i already have the botanicare microgarden hydro system so i will be installing the res down in the bottom chamber and the tray will sit all the way down with the top lip of the tray on the bottom of the gro chamber.
also... the front i need help with hinges.. and doors and such i dono how im gona make light tight..
i will be doing scrog at a good height
any comments or questions would be very appriciated also i will prob start a diary soon for the box build!