X15
Well-known member
I’ll make this short. Any questions feel free. Its air tight and fits perfectly under my house where it is always 17-20 degrees colder than the outside air temp. I live in the desert where drying is a challenge is for a couple months out of the year. The temp under my house is very stable. I live in a modular home and my gfs 3 kids (they are adults damnit!) live with us so I’m pretty limited on space all around lol.. I’ve used this many times for the dry and it works beautifully.
Humidity in there is the tricky part. How wet and how much wet material you put in has everything to do with how humid It’ll get and I can add some ice (in a container) after about a week to help bump it up a bit. I can regularly get 10-15 days safely in here depending on the weather.
I can keep it between 50-60 RH. only Time it has gone above 60 was early on before I found the happy middle between too much and not enough wet material.
There’s a 4inch intake on the back with a deflector and a 4inch exit near the front side. The intake fan is on the exit pulling air in from the back intake. Good quality Carbon filters on both sides are a must. On low I can cycle the air through gently and consistently. I have yet to smell it fully loaded. maybe a little inside the (adult 22) kids room lol.
I understand it looks a bit dangerous to The humid growers but I live in the desert Where mold isn’t as big of an issue. Paying proper attention to the wireless meters inside as well as out (near intake)… also, Making sure every bit of material that goes in is safe to go in! Inspection of everything I feel is super critical to the success of the Coffin.
The Coffin is about 9 feet by 35”T, 30”W. With about 75 percent usable space.
Thanks!
