Viral505
Member
I'm still new to this but I followed this dude's guide to build one https://www.youtube.com/watch?v=z27lzS1l9_8&t=325s
I keep the Eco370 Adjustable Water Pump running 24/7.
This is what I've been using
10 gal - RO water (replace water every 7 days)
25 ml - Dyna_Gro Pro-Tekt
25 ml - Dyna_Gro K-L-N
25 ml - Dyna_Gro Bloom
20 ml - Botanicare Hydroguard
5 ml - Flying Skull part 1 Z7 enzyme (every 3-4 days)
5 ml - Flying Skull part 2 Z7 enzyme (every 3-4 days)
23 days later and this is what we have:
I do not have a light "directly" above the clones, I have a 4' 8 bulb T5 that I have 4' above it and over about 1-2', this is the light I'm using for my mother plants.
I sterilize between each run with bleach water and ran it through 20 minutes on each side of the sprayer and rinsed it out well.
Temps of the water I have not been measuring, but it doesn't feel cold or warm. I measured the temp with my infrared thermometer and it seems like it is 4*F higher than ambient temps, highest I've seen is 84*F for an hour or two. Ambient temps dip down to about 63-65*F at night.
Not sure why its taking so long :/
Should I be using airstones to oxygenate my water??? I do have two 4" round airstones and a 45L/minute air pump.
I keep the Eco370 Adjustable Water Pump running 24/7.
This is what I've been using
10 gal - RO water (replace water every 7 days)
25 ml - Dyna_Gro Pro-Tekt
25 ml - Dyna_Gro K-L-N
25 ml - Dyna_Gro Bloom
20 ml - Botanicare Hydroguard
5 ml - Flying Skull part 1 Z7 enzyme (every 3-4 days)
5 ml - Flying Skull part 2 Z7 enzyme (every 3-4 days)
23 days later and this is what we have:
I do not have a light "directly" above the clones, I have a 4' 8 bulb T5 that I have 4' above it and over about 1-2', this is the light I'm using for my mother plants.
I sterilize between each run with bleach water and ran it through 20 minutes on each side of the sprayer and rinsed it out well.
Temps of the water I have not been measuring, but it doesn't feel cold or warm. I measured the temp with my infrared thermometer and it seems like it is 4*F higher than ambient temps, highest I've seen is 84*F for an hour or two. Ambient temps dip down to about 63-65*F at night.
Not sure why its taking so long :/
Should I be using airstones to oxygenate my water??? I do have two 4" round airstones and a 45L/minute air pump.