HP Aero and LEDs
- Thread starter malendro
- Start date
malendro
Member
malendro
Member
Last macro
Last macro
As you can see, amber trichromes are nowhere to be found, and over 80% are milky white for shure.
The guy who gave me this strain told to wait until 15% is amber and then flush for two weeks, but I kind of want to start the flush in 5 days.
Any suggestions or critiques?
Last macro
As you can see, amber trichromes are nowhere to be found, and over 80% are milky white for shure.
The guy who gave me this strain told to wait until 15% is amber and then flush for two weeks, but I kind of want to start the flush in 5 days.
Any suggestions or critiques?
Attachments
malendro
Member
malendro
Member
Root-pr0n
Root-pr0n
No aeroponic grow journal is complete without a healthy dose of root porn.
These are the roots, there are 5 plants but I had problems getting them all in the frame. That lid was very heavy.
My roots are white when up close, but they have developed a golden brown tone thanks to the seaweed extract.
Root-pr0n
No aeroponic grow journal is complete without a healthy dose of root porn.
These are the roots, there are 5 plants but I had problems getting them all in the frame. That lid was very heavy.
My roots are white when up close, but they have developed a golden brown tone thanks to the seaweed extract.
malendro
Member
First day of Flush
First day of Flush
It has been 8.5Weeks so far, and today I began to flush.
I ran 6 gallons on Drain to Waste after I cleansed the res, and all the filters. I had 500ppm after the first 3gallons, and 150ppm after the second 3gallons.
I plan on changing the water today once again, and probably every day for the next 3 days. the flush will run for at least 2 weeks, and I am using Final Phase as a flushing agent.
This time I took all the pics with the nice camera, in hopes to share better pics:
First day of Flush
It has been 8.5Weeks so far, and today I began to flush.
I ran 6 gallons on Drain to Waste after I cleansed the res, and all the filters. I had 500ppm after the first 3gallons, and 150ppm after the second 3gallons.
I plan on changing the water today once again, and probably every day for the next 3 days. the flush will run for at least 2 weeks, and I am using Final Phase as a flushing agent.
This time I took all the pics with the nice camera, in hopes to share better pics:
malendro
Member
Flushing Process
Flushing Process
Day 2of flush: from the original 3gallons, 1.5gallons came out with 130ppm.
Note that the 3 gallons of RO water originally have about 7ppm.
I also noted that water consumption has increased since only about 1.5gallons are coming out.
Day 3 of flush: 1.5 gallons came out with 188ppm.
This time I used a flushing agent that had brought the original 3gal up to 120ppm before starting circulation
Day 4 of Flush: 1.5 gallons came out with 170ppm, flushing agent was used at the same 120ppm
Day 5 of Flush: 1.5g came out at 50ppm, flushing agent was not used.
I will now load it up with 14 gallons of water and leave the thing alone for the next 10days.
Flushing Process
Day 2of flush: from the original 3gallons, 1.5gallons came out with 130ppm.
Note that the 3 gallons of RO water originally have about 7ppm.
I also noted that water consumption has increased since only about 1.5gallons are coming out.
Day 3 of flush: 1.5 gallons came out with 188ppm.
This time I used a flushing agent that had brought the original 3gal up to 120ppm before starting circulation
Day 4 of Flush: 1.5 gallons came out with 170ppm, flushing agent was used at the same 120ppm
Day 5 of Flush: 1.5g came out at 50ppm, flushing agent was not used.
I will now load it up with 14 gallons of water and leave the thing alone for the next 10days.
