stemznseedz
Member
4k 24 plants 2 gal airpot coco grow DTW.
I want a drip system that's essentially flawless. Exact same amount of water to all 24 sites, room for expansion even if by zone and rock solid dependability. I intend to build a system I can completely automate. I won't say money isn't a issue but I'm willing to bite the bullet and pay to do it the realistically best way possible.
IF there is any way i should change this plan before i pull the trigger please let me know.
- Water Pressure Regulator Adjustable w/gauge (can adjust between 14-116 psi)
- Shurflo 2088-594-154, 2088 Series, 198 GPH, 115 VAC Diaphragm Industrial Pump (45psi cutoff) built-in check valve
- Netafim Spray Stake (operating 22-55 psi)
- 155 mesh inline Garden Filter (netafim recommends 120u but i already got 155)
- t fitting, elbow, ball valve right at the res on the line going out that goes back into res before the pressure regulator in case i hit the 45psi cutoff i'll be able to release some of the pressure by letting water go back to the res.
I want a drip system that's essentially flawless. Exact same amount of water to all 24 sites, room for expansion even if by zone and rock solid dependability. I intend to build a system I can completely automate. I won't say money isn't a issue but I'm willing to bite the bullet and pay to do it the realistically best way possible.
IF there is any way i should change this plan before i pull the trigger please let me know.