Hello there people...
First of all let me show you my firsτ approach...
As you can see in the pic below.. i was planning to have my configuration with one big (and already bought) centrifugal fan named V1.....
this plan was abandoned since i have read the great thread found here named "Ventilation 101" that explain a lot not only about ventilation but also mention that "The plants only needs 3 to 5 Minutes per Air Changes (MpAC)"
(hxxps://www.icmag.com/ic/showthread.php?t=112862)
So.. running the 765cfm fan at it's full speed in order to also keep the lights cool and generally the temperature at the desired levels.. was impossibe.
So i decide to "split" my ventilation...
1 fan will run the carbon filters ONLY...
and 1 fan will cool down the 4 x 600 watt HPS lamps..
See below...
If i place my 1300m3/h - 765cfm (named V1) to Cool tube ventilation system it will be Ok?
too much?
Less than is needed???
Is there any specific formula to calculate the air flow need through a 6" (or whatever inch) cool tube in order to cool down the lights? (in my case the 600w hps connected in series)
Thanks in advance...
Feel free to correct me if i'm wrong at my design...
First of all let me show you my firsτ approach...
As you can see in the pic below.. i was planning to have my configuration with one big (and already bought) centrifugal fan named V1.....
this plan was abandoned since i have read the great thread found here named "Ventilation 101" that explain a lot not only about ventilation but also mention that "The plants only needs 3 to 5 Minutes per Air Changes (MpAC)"
(hxxps://www.icmag.com/ic/showthread.php?t=112862)
So.. running the 765cfm fan at it's full speed in order to also keep the lights cool and generally the temperature at the desired levels.. was impossibe.
So i decide to "split" my ventilation...
1 fan will run the carbon filters ONLY...
and 1 fan will cool down the 4 x 600 watt HPS lamps..
See below...
If i place my 1300m3/h - 765cfm (named V1) to Cool tube ventilation system it will be Ok?
too much?
Less than is needed???
Is there any specific formula to calculate the air flow need through a 6" (or whatever inch) cool tube in order to cool down the lights? (in my case the 600w hps connected in series)
Thanks in advance...
Feel free to correct me if i'm wrong at my design...