methias
Active member
Good morning all.
First off I wanted to thank everyone at icmag for all the support and information. My grows keep improving because of tips and advice from you all.
Let's go. I harvested my Venom OG last week https://www.icmag.com/ic/showthread.php?t=369434 and it's time to reload the turntable. I have a Cheese clone that I cloned in a little bottle of water on the window sill late October. By mid November she had roots but she also started to flower.
I didn't take into consideration that mom was in a box with a schedule of 18/6 and it was the end of October with diminishing sunlight. The window sill cloning was really just a quick test with an extra cutting and nowhere else to put it. But it worked.
I put her in soil and returned her to the mom / clone cabinet to revegg with 18/6 as before.
By the start of December she was back vegging and in the queue to ride the turntable once the Venom OG Judy finished her ride.
My new Judy resides in a 5 gallon fabric pot and is enjoying the turntable ride with 18 / 6 for the next 2 weeks.
The turntable,
Plywood base with a heavy duty lazy susan and a round board on top of that. You can see the metal lazy susan sandwiched between the wood.
The drive motor is a 12 volt geared motor that I attached a A/C compressor rubber foot. I made a gravity slide for the motor so the rubber foot (drive wheel) sets on the edge of the circular board and that creates enough friction to turn the turntable.
The drive wheel and motor.
Judy is not very tall yet so she is on her booster chair (cut down blue bucket) to get the best lighting till she gets taller.
More soon.
Vape on kids.
First off I wanted to thank everyone at icmag for all the support and information. My grows keep improving because of tips and advice from you all.
Let's go. I harvested my Venom OG last week https://www.icmag.com/ic/showthread.php?t=369434 and it's time to reload the turntable. I have a Cheese clone that I cloned in a little bottle of water on the window sill late October. By mid November she had roots but she also started to flower.
I didn't take into consideration that mom was in a box with a schedule of 18/6 and it was the end of October with diminishing sunlight. The window sill cloning was really just a quick test with an extra cutting and nowhere else to put it. But it worked.
I put her in soil and returned her to the mom / clone cabinet to revegg with 18/6 as before.
By the start of December she was back vegging and in the queue to ride the turntable once the Venom OG Judy finished her ride.
My new Judy resides in a 5 gallon fabric pot and is enjoying the turntable ride with 18 / 6 for the next 2 weeks.
The turntable,
Plywood base with a heavy duty lazy susan and a round board on top of that. You can see the metal lazy susan sandwiched between the wood.
The drive motor is a 12 volt geared motor that I attached a A/C compressor rubber foot. I made a gravity slide for the motor so the rubber foot (drive wheel) sets on the edge of the circular board and that creates enough friction to turn the turntable.
The drive wheel and motor.
Judy is not very tall yet so she is on her booster chair (cut down blue bucket) to get the best lighting till she gets taller.
More soon.
Vape on kids.
Last edited: