2000pm
Member
First thanks to everyone in my old thread for assisting with the formation of this plan. It took a little longer than wanted to get everything together but better learn to swim before jumping right in. I've done much reading and forgotten a ton of stuff I have learned already . This is just a hobby/fun run anyway so my only time constraint is the approaching warmer weather.
SPECS:
Tent: Secret Jardin DR60 II. (2x2x5)
Light: (4x) 55w PL-L/2g11 (ah supply), 220w total. 2x3000K and 2x6500K during veg. 4x3000K during flower.
Circulation: Phresh filter 4x12”. S&P TD100x Duct fan (135 cfm)
Media: (4x) 3 gallon buckets, 100% perlite
Method: Hempy buckets. GH Micro Lucas formula + cal/mag + silica blast + koolbloom during flower.
Would have run regular 70/30 hempies or even coco but I don't mind having to water more frequently and perlite was on hand - I am definitely one of those oft-handsy gardeners so LST and scrog is right up my alley. Also wanted to avoid any possible pest issues encountered by running some organic medium - simple and clean is the motto here.
'NETICs
Chocolope (Chocolate thai x Cannalope haze)
Space Bomb (Space Queen(C99 x Romulan) x tiny pheno)
Querkle (Purple Urkle x Space Queen)
Just took what came around, no deep picking and choosing here.
Still planning on a mod scrog after seeing Verdant's success with his dialed setup but right now the chocolope is 3 weeks ahead of the TGA strains in veg due to timing of clone receipt. Mod-scrog's flexibility will allow me to maintain proper canopy height between the four pots but I am worried the chocolope will not get the light penetration she needs with how far ahead she is and how much subsequent stretch she may have versus the more indica-favored hybrids.
I was given good advice that a full screen is a full screen, but since I was planning on the mod scrog the chocolope wont be able to take up the slack for the other three if I continue a scrog.
It was said 2x2 is cramped once plants were in there but now I am fully realizing this. Even with a mod scrog getting in there to do work is going to be tight so I am somewhat afraid to throw a screen on there right now. Continue with the scrog idea or just try to lst them instead?
Future plans for this includes adding some Luxstrips to the PL-Ls for a weaker ghetto version of Rives' awesome hybrid light. I could also re-rig the fan/filter for better flow at some point. Maybe try turface instead of perlite.
SPECS:
Tent: Secret Jardin DR60 II. (2x2x5)
Light: (4x) 55w PL-L/2g11 (ah supply), 220w total. 2x3000K and 2x6500K during veg. 4x3000K during flower.
Circulation: Phresh filter 4x12”. S&P TD100x Duct fan (135 cfm)
Media: (4x) 3 gallon buckets, 100% perlite
Method: Hempy buckets. GH Micro Lucas formula + cal/mag + silica blast + koolbloom during flower.
Would have run regular 70/30 hempies or even coco but I don't mind having to water more frequently and perlite was on hand - I am definitely one of those oft-handsy gardeners so LST and scrog is right up my alley. Also wanted to avoid any possible pest issues encountered by running some organic medium - simple and clean is the motto here.
'NETICs
Chocolope (Chocolate thai x Cannalope haze)
Space Bomb (Space Queen(C99 x Romulan) x tiny pheno)
Querkle (Purple Urkle x Space Queen)
Just took what came around, no deep picking and choosing here.
Still planning on a mod scrog after seeing Verdant's success with his dialed setup but right now the chocolope is 3 weeks ahead of the TGA strains in veg due to timing of clone receipt. Mod-scrog's flexibility will allow me to maintain proper canopy height between the four pots but I am worried the chocolope will not get the light penetration she needs with how far ahead she is and how much subsequent stretch she may have versus the more indica-favored hybrids.
I was given good advice that a full screen is a full screen, but since I was planning on the mod scrog the chocolope wont be able to take up the slack for the other three if I continue a scrog.
It was said 2x2 is cramped once plants were in there but now I am fully realizing this. Even with a mod scrog getting in there to do work is going to be tight so I am somewhat afraid to throw a screen on there right now. Continue with the scrog idea or just try to lst them instead?
Future plans for this includes adding some Luxstrips to the PL-Ls for a weaker ghetto version of Rives' awesome hybrid light. I could also re-rig the fan/filter for better flow at some point. Maybe try turface instead of perlite.