Topsy Turvy Fridge Grow/Clone Box

[Fishywater]

OK, here is where the seeds are at.
How long till they go in the rock wool starter cups in the AeroGarden?

Thanks

 

[Meison]

I usually move the ones already with a long root, place the root carefully in the RW hole, if the premade sucks make your own. And just wait, when the root hits the bottom you will se the seed raise and open

I would move 3/4 of yours already hehe

 

[atk7]

Subbed good luck with the cab . this should be fun to watch

 

[Fishywater]

Well, the seeds are in their new home for a while.
I opened the hole up a little and carefully set the seed with taproot down and gently pulled and fluffed the wool to touch the root and cover them ever so slightly.

 

[Fishywater]

Domes have a nice bit of humidity this AM !

 

[Kozmo]

I thought warm white or soft white was the type of CFL's to use or is that the type for veg?

 

[Fishywater]

I thought warm white or soft white was the type of CFL's to use or is that the type for veg?

It's the standard Aerogarden grow bulb.
26W times 2.
Should do great till time to put them in the fridge.

 

[Fishywater]

OK
I'm not gonna post pics every 10 mins but WoW are these things poplin!
You can ALMOST watch them grow.

 

[Fishywater]

How soon till the domes can stay off?

 

[Kozmo]

I'm watching

 

[Fishywater]

Domes are off 3 of them.
1 is straggling behind a tad.

 

[Fishywater]

I know I coulda used a power strip, but those things sometimes suck and trip unexpectedly.
So I wired up a double 4-way box(es)

 

[stoned-trout]

nice... I did a fridge grow way back cannabis world days ...mine had freezer on top and that's where I put the light....worked great...good luck

 

[Fishywater]

Got the Blauberg fan today!
This thing blows pretty darn good and is quiet too.
It has a neat feature, you loosen 2 built in clamps and the motor assy. slides right out of your way.
Then you mount the frame and hook up your ductwork on each side. Slide the motor back in and position any way you want (you can keep the switch box strait up and down or rotate it to the rear as I have or any position in between.
And re-clamp the big clamps ant that's it.
The level over the top indicates that it still will fit under a top to be installed later.

I foil taped the inside and outside of the 6" elbows.
Still need to get 2 6" hose clamps for directly onto the fan housing.

 

[Fishywater]

2 more pics !

 

[Fishywater]

Here is a couple better shots of the completed assembly including DIY carbon scrubber.

 

[Fishywater]

OK, so that portion is done, now if I can find my stinking hole saws, I can get the inlet holed drilled.
I am in FL and it gets kinda warm here.
I am not opposed to hooking up to a little mini-fridge for cooling if I need it, but I was thinking, on a hot day, where would the dogs want to lay, IF they could get there?
UNDER the shed, in the cool dirt… right?
So I am gonna try this.
I am gonna open 2 4" holes (mayne 3) and run dryer ducting to holes I drill in the floor drawing in air from under the shed.

What do you all think about this idea ???

 

[Fishywater]

On the inside I am using the dryer vent piece that would go on the outside of your house.
When the fan is on, the louvres should open and then close when the fan is off.
One in the bottom right of the Veg area and 1 coming in right behind the nutrient res.

 

[Fishywater]

OPEN like so…

 

[stoned-trout]

I used to draw air in from under my house...it worked great...