Medible help please? I can no longer smoke

[Dank Demon]

sorry to hear this bro, hope the medibiles help with the pain. heres a reciepe for canna caps, i've posted it over on bbay too. but thought others may find it usefull hear too.

this was taken from another site, there where pics posted but i'm not sure how to get them up. be careful though as they are very strong. big up to elite nugz for the reciepe.


CannaCaps 101. Very potent and easy to make.
A few people have asked me for the recipe to the CannaCaps that I make. They come out super potent and it only takes one to get the job done.

So here’s what you need….

- 7+ Grams of some good shake, or small buds
- Virgin Coconut Oil (Has to be raw, virgin coconut oil)
- Size “00” Gelatin Caps (perfect size to hold 1ml of CannaCap oil)
- A small pot and small glass dish that can withstand high temps
- Cheese Cloth or Coffee Filter
- Grinder (optional)


The amount of weed you use, depends on how many caps you want to make. I usually start off with around 7 grams of tiny dry popcorn buds, or some good keify shake.



I like to get the weed and toss it in a grinder and let it run for 15-20 seconds, to turn it into a more fine powder. This step is optional, but I think grinding everything up exposes more surface area, and helps things along some.





After you have your ground up buds, pre-heat your oven to 250 degrees. Once your ovens hit 250 degrees, put your glass dish of weed into the oven and leave it in there for about 30 minutes. Cooking the weed at this temperature activates the psychoactive components in weed. For example, if you eat a dry bud, its really not going to have much of an effect on you. If you heat that same bud up to 250 degrees for 20-30 minutes, and then eat it, it will have a major effect on you. So make sure not to skip this step, it will drop the potency of your caps big time.



Set for 250 degrees


Cook for 30 minutes


After your buds are cooked, then its time to add the Coconut Oil. The amount of coconut oil you use will determine how potent your caps turn out. I like my caps nice and potent, so I add just enough coconut oil to saturate the weed. You want to get a nice muddy mix going on. Not soupy, to where your weed is swimming around in coconut oil, but just enough to where you have just a little runoff oil sitting in the bottom of your dish. Mix it up nice and good and slowly add the coconut oil, to make sure you don’t put too much. If you do add too much, just prepare some more weed and add it to the mix until things are nice and muddy.





Now its time to cook it again. This part binds the THC and other psychoactive chemicals to the fat in the coconut oil. Coconut oil is extremely high in fat. Its almost 100% fat, so in my opinion, it’s the absolute best thing to use for making these caps. If you use something other then virgin coconut oil, and don’t get good results, then don’t blame me. LoL.

So you can either use a crockpot for this step, or you can just use a small pot like I do. The key is to heat your mix up to around 200 degrees and keep it there for hours. The longer you cook it, the better. 180 – 220 degrees is the range you want to stay in. Anything out of that range, and your mix wont be binding to the fats how you want it to. I use a pot filled with a couple inches of water in it. I heat the water up to a simmer. Not a crazy boil, but right before it starts really boiling. Water boils at around 212 degrees, so if you cooking things at a simmer, then you should be perfect.

Place your glass dish of weed and coconut oil in the water, and let it cook. The longer you let it cook, the better and more potent your caps will be. I let mine cook like this for a minimum of 4 hours. If you decide to use a pot like I do, then make sure to check your water level every 30min to an hour and add more water as its needed.



After cooking your mix for at least 4 hours, then its time to strain out all of your oil. You can use a cheese cloth, coffee filter or what I use is a “press screen” that came with my extraction bags for making hash. You could even use an old t-shirt, if you don’t have any of the above. Just make sure its clean. Place your oil soaked buds into the middle of your cloth and squeeze as hard as you can until all of the oil it out. I try to get every last drop out of the mix.









Once you’ve squeezed out all of the good stuff, its time to put the oil in caps. I use a small dropper to put 1ml of oil into each cap. 1ml is all that is needed to really get you high. It doesn’t seem like much, but trust me…. Its more then enough!! I’ve had people complain and even get mad at me for giving them such strong caps. If you have a super high tolerance, then you’ll enjoy one cap. If you have a medium to lower tolerance, then you may want to add extra coconut oil to dilute them some. Personally, I like to take a half of a cap if I have things to do. If Im just home, with nothing to do, then a full cap is more then good enough.



Storage. You should store these caps in the refrigerator. Virgin Coconut Oil turns into a solid below about 76 degrees. Anything higher then 76 degrees and the coconut oil turns into a liquid. The oil can and will leak out of the caps if you keep them sitting at warm temps for too long. So storing them in the fridge is the best way to go. The oil stays in its solid form and will easily stay good for months. The longest I’ve kept caps in the fridge for was about 2-3 months, and they were still just as good as when I first made them. So I don’t know how long exactly they’ll stay good for, but you’ll have at least a few months.

I ended up being able to make about 50 caps out of that small batch. Not bad for just a little bit of shake.


So that’s how you make em. Pretty simple and easy. Instead of making hash and edibles, all I make now are these CannaCaps. With 7 grams of good weed or shake, you can easily make 30+ caps. The only bad thing about them, is that it takes 45 min to 3+ hours for you to feel the effects. How fast they hit you totally depends on the person. They hit me within an hour and a half. I’ve seen them take over 3 hours for some people to feel the effects of them. So a good time to try them out is usually around 4:20pm. : ) If you take them too late, then you’ll probably fall asleep before you feel the effects.

Hey Biggs my friend,

Just following this guide now but the bit here "pre-heat your oven to 250 degrees." I take it thats not the temperature for a fan assisted oven? As I just did this and within minutes the stuff was smoking the whole kitchen out like a factory and glowing orange in parts while stinking the house out like a coffee shop. I had a right fooking panic moment and took it out of the oven as it was smoking like a chimney so I took it outside as the house was stinking right out of Amnesia Kush, the smoke was un believable as I was trying to put out the parts on fire lol, I was getting high just doing this. So what is the correct temperature for a fan assisted oven if anyone knows, as I am not doing that again.

 

[jaded1]

D.D,it should be 120c,Biggs must of meant 250 farenheit,not celcius.

 

[Dank Demon]

D.D,it should be 120c,Biggs must of meant 250 farenheit,not celcius.

LMFAO I thought it must have been wrong!! Cheers bro.

 

[Green81]

Lol, you guys making me chuckle

Peace

G81

 

[Harry Lime]

Hey Biggs my friend,

Just following this guide now but the bit here "pre-heat your oven to 250 degrees." I take it thats not the temperature for a fan assisted oven? As I just did this and within minutes the stuff was smoking the whole kitchen out like a factory and glowing orange in parts while stinking the house out like a coffee shop. I had a right fooking panic moment and took it out of the oven as it was smoking like a chimney so I took it outside as the house was stinking right out of Amnesia Kush, the smoke was un believable as I was trying to put out the parts on fire lol, I was getting high just doing this. So what is the correct temperature for a fan assisted oven if anyone knows, as I am not doing that again.

So it was you!!! Swear I could smell that shit from my back garden, you must be close

 

[theherbalizor]

Move over medibles and standard vaporisers.

Well my sublimator xlr Apollo titanium with 12 inch tube, stainless steel base with oil catcher and whip arrived yesterday.

Turned it on for an hour to remove any machine oils. Soaked the atomiser in alcohol for a while to clean.

Ground up a usual nights usage. About 0.7 g. Chem D.

Put about 0.1 into the sublimator with it set to 7 on the dial.

The vapour is so so thick, 10 x thicker than in volcano. Taste is awesome although a slight metal taste which I'm sure will ware off in a few days.

Prob had less tokes from it than I would a volcano balloon. BAM I'm seriously high. I mean soaring to the point of, oh shit I've over done it.

Then within 5 mins I'm in fight the whitey mode! Full on whitey. Just resisted passing out by taking anti passing out measures. Ie, sticking an ice pack on the back of my head for 15 mins and giving my dogs a hug to keep my mind off of how fucked I was.

Could hardly walk.

After about 30 mins I started to feel a little more down to earth again but still seriously stoned. Munchies! Eat a load of chocolate tiffins. Next thing I know its 3am and I'm waking up on my sofa. My grinder still full of all the weed I had planned to sublimate.

Dam this thing is efficient. 0.1g max and I whited, which I haven't done since I eat too much weed in the dam when I was a teenager.

Using this thing with caution now. Almost slightly scared!

God knows what oil is like thru it.

Seriously good bit of kit and really does make the volcano and about all other vape seem like kiddies toys.

 

[Cloneman]

Sounds like the ticket, nice one!

 

[Dank Demon]

Where did you get it mate?

 

[Green81]

Im sold!

 

[theherbalizor]

Cheers guys.

I purchased it from Sublimator them selves in canada. Very helpful. 4 days to get to UK and 10 days in customs. Wankers.

But don't bother with ANY other vape. If I think back to how much I have put thru the volcano it makes me shudder at the immense waste of weed. I reckon last night I was more stoned / high then the whole last 2 years of vaping put together.

Don't give it to light weights, like me, it will kill them. I'm slightly fearful about tonight's attempt. Going for just one toke rather than 2. Lol

 

[BushBurner]

this sounds qualty i am up for this...does it cost more than a volcano?

 

[sandsmp81]

I love a good whitey........OK I'm lying but I look forward to getting close to one,the hot and cold sweats are not nice but I've more or less sussed how to control one by focusing on something rather than letting it take over.

Interesting bit of kit that if it can do that to a seasoned toker off 0.1g.

 

[Dank Demon]

Thanks herbs I have now just treated myself to a 12" Sublimator Medical Kit with titanium Dabmaster XLR 2.0 which has helped lighten the wallet from Canada. How much did you pay in tax mate on arrival so I know how much more to look forward to lol? Thanks. Now does anybody want to by my Volcano dial jobby to help recover the costs? LMAO

 

[SupaFunk]

I was gonna buy a subliminator after seeing them at Spannabis!

Do they come with a UK plug or do you need an adapter?

 

[SativaBreather]

sounds ridiculous
could well invest in one myself

 

[Dank Demon]

I was gonna buy a subliminator after seeing them at Spannabis!

Do they come with a UK plug or do you need an adapter?

I am hoping they supply the correct plug for the country that is buying them but I have loads of adapters just in case. I will let you know when it arrives mate with some pics

sounds ridiculous
could well invest in one myself

Do it mate! From all accounts you will not regret it, but I will give my feedback on it as well once I come around.

 

[SupaFunk]

Thanks DD. I've been hovering over the 'buy' on this bit of kit for an age now. I sent them an email to check, but never heard back from them.

 

[theherbalizor]

Congrats DD.

Ok, if you buy the v1 system, the cheap one that's at 495 dollars, it's non auto voltage sensing and runs at 110v only, so will need a 100w step transformer. They will also not warranty this for UK use.

But as dank has purchased an xlr his unit is auto voltage sensing. It will come with a European schuko type plug. But this is just a kettle lead that plugs into transformer. So just get your self a normal kettle lead or one of those cheap travel adaptors and you are good to go.

 

[SupaFunk]

Thanks Herb, much appreciated for the heads up.

Looks like I'm off to spunk some cash now on new shiny!

 

[Fields~of~Green]

Nice review thanks for the heads up piff

Any pics of the atomiser plate herbs?

110w is that the power to the atty or power supply?