Indoor MMJ Floorplan Design in Progress

[McKush]

Ok, here it is. The high level finalized version after countless iterations and re-considerations. Focusing on the Flower Room (FR) and will let the veg/clone closet ride for a while and will use the space next to the FR without much permanent installation (no dedicated closet yet but that may come.)

I'm liking the volume of the studio space with one corner of the FR clipped. Makes it feel bigger and more comfortable in the studio area than when I laid out a perfect 5.5x6 rectangle. So one corner gets clipped for the 32" door. Plan on doing an internal door within a door at the main entrance and a proper door into the FR. Going to go with Fire Rated doors for safety.

I'm planning on using cement board and tile on the entire interior of the FR. White tile with grey grout or something. Because soundproofing is high priority will probably use multiple cement board layers with green glue at rate of 3 tubes per 4x8. (the recommended best treatment, not 2 tubes per)

 

[Granger2]

Have you started construction? I don't follow this 10' deep pit thing. Or do I need to wait to smoke my organic produce till after I read your thread.

The effective bloom footprint of a 1000w lamp is 4x4, a 600w is 3x3. 5.5x6? Good luck. -granger

 

[Buddler]

Hey Buddler - what sort of music and/or bands do u like? Ill listen to some while I work out here.


You totally nailed my sentiments with your earlier post and id like to honor you in my own way.

Cheers

How bout some Neil young or some Stevie ray vaughn . I play guitar as well and harmonica .keep up the good work lots of pros here to help you along buddy. Your gonna love coco check out big greens thread..Buddler

 

[McKush]

On The Beach (remastered vers.) Streaming from my amazon prime account out in "the bunker" right now. Cheers man.


Glory days Buddler. Happy Thanksgiving

 

[McKush]

My Buddler playset yesterday;

1. On the Beach 1974
2. Tonights The Night 1975
3. After the Gold Rush 1970
4. Rust Never Sleeps 1979


I have harvest and another somewhere but not ripped them yet. Tons of cassettes and LPs that might hold some SRV n Neil.

Fyi. Neil Young is a name I use when I create dummy employees for demos...

 

[McKush]

Update. Not much accomplished yesterday but I did attempt to push the 4 stranded alum wire. Going to have to run a fish and tape it on. Trying to figure out how to safely (not compromise the wire sleeving) pul the wire

 

[Buddler]

Mc Kush you could get a small tent for your veg ,clones mothers and wont have to build separate area. Keep it right in FR that's what I do works great. Crank up some lynard skynard plants will love it ...Buddler

 

[mowood3479]

If u r in a cold climate i would consider either insulating the floor (foam board) or having a plan to get plants off the cold floor

 

[McKush]

Two days to pull the 4 strand 100A 220v wire for service thru 90 feet of conduit under decking.... sucked in a good way. But it did thoroughly suck ass. My hands are hamburger.

2nd worst day of 2013 and its been a particularly shitty year. Buried three of my koi and I fear all are lost. 15 years of koi husbandry fucked away by not adhering to my fall/winter procedures.

My Matsunoske sanke was 24.5" over 5lbs. A stunning animal I was proud to keep. None of this means shit to anyone but me im sure. It was a bad day for me

 

[McKush]

Today I drank soup salted by my tears - McKush

 

[McKush]

Have you started construction? I don't follow this 10' deep pit thing. Or do I need to wait to smoke my organic produce till after I read your thread.

The effective bloom footprint of a 1000w lamp is 4x4, a 600w is 3x3. 5.5x6? Good luck. -granger

Granger - light I am using in FR is the ePapillon. Its a horticulture lamp best used in 10' rooms if you want to get the most out of your light source. Uses the phillips de bulb..... a 30 inch separation required at 1150W setting.

I have reasons

 

[McKush]

Passed a milestone tonight. Have the new new 100A 120/240v subpanel operational. Lots of effort to get done but the bunker as we call it now has its own electric service.

 

[McKush]

If u r in a cold climate i would consider either insulating the floor (foam board) or having a plan to get plants off the cold floor

Roger that Mo! Going to insulate as best I can.

 

[McKush]

Anyone interested in this build please follow it in the Grow Designs & Equipment forum which I've moved into for a while. No need muddying up the Coco Coir forum with a closet build thread....



Check me out over there or check my Indoor MMJ Design Album, photos are numbered in sequence:

https://www.icmag.com/ic/album.php?albumid=49413

The build thread:


https://www.icmag.com/ic/showthread.php?p=6095740#post6095740