Tumble Now Rotator Dry Sifting Machine

[Green Supreme]

Laughable. Come back when you can act like an adult. Peace GS

 

[DrySiftWizard]

.

 

[Green Supreme]

Please quit, you are putting my rep level through the roof. Never got so much in one day. Peace GS

 

[Green Supreme]

Oh ya asking questions you already know the answers too, kinda like being fluent in Spanish but taking a course in it to pad yer stats. Peace GS

 

[DrySiftWizard]

.

 

[DrySiftWizard]

.

 

[Green Supreme]

"I'm assuming that 50 y/o mark wasn't far off, seeing as how you're ignoring it and moving right along into another subject. Haha. "

Ah, the age thing was an insult. Interesting, what is the cool age now anyways? Wonder how many folks you insulted there then. Peace GS

 

[DrySiftWizard]

.

 

[Green Supreme]

Nope, was just not that high on my priority list. If you would like to send me one ,I could arrange a safe addy. Would show how seriously you back yer words. Remember some of do run grows in our spare time. How is it you go about getting your material? You sportin some one else's goods? Peace GS

ps,. sorry if it bothers you that I would try answer questions folks ask me. How rude of me, lol.

 

[Chamba]

(here's a post that was posted on another thread that's more relevant here)

DrySIftWiz.............what's stopping you from showing us how you do it? Please don't bother answering that one (as it's been asked plenty of times before), as I'd rather not hear you ranting on about how good you are, how hopeless we are, who expensive tumblers are and not get an answer on how apart from you will be telling us just after Sam tells us how ..lol....

and let me guess, you can manage to yield about 5% of the available resin on the starting material with your method, that's not that hard with 10 gentle taps on the frame with small amounts of quality trim at a time and then resift it...but what about the other 95% of the resin?, I guess you'll have to buy a tumbler from Bubbleman to get that or do you have a set of Bubblebags already? I don't know why you are hating on him and everyone else, there are many people here who prefer to use dry sifting methods to remove 100% of resin on the material, not just a small percentage of it...some of us do both and if you actually checked out the specs of the Bubbleman Tumble Now tumbler you would see that you could do both, run it for a few minutes and then use the 70 micron flat screen on the drawer under the mesh cylinder to resift and purify that first run. Then you could start up the cylinder again and run it for 10~20 minutes to strip most of the resin off the material...the first run of dry sift will yield very clean resin that will zing your brain and the second run will press under pressure to form commercial quality hash.

 

[Chamba]

Sam's method as we seen via Biubbleman's photos will produce very pure dry sift, but the yield is extremely low (10 grams of resin per kilo of starting material...or about 10% of the resin on the material)...I'd be a lot more interested in taking that method and modifying & innovating it so it can produce very clean dry resin as well as separate all the resin from the plant material....now that would be a wonderful thing....using some "secret" method to get 0.3 of a gram of pure dry sift per ounce is a lot less interesting for me, but hey, each to his own. If I had boxes full of trim given to me then I'd probably change me tune...but I'd reckon most of us here don't have buckets and buckets full of trim to play with and are interested in a combination of purity and yield, not one or the other.

 

[DrySiftWizard]

(here's a post that was posted on another thread that's more relevant here)

DrySIftWiz.............what's stopping you from showing us how you do it? Please don't bother answering that one (as it's been asked plenty of times before), as I'd rather not hear you ranting on about how good you are, how hopeless we are, who expensive tumblers are and not get an answer on how apart from you will be telling us just after Sam tells us how ..lol....

Sam supposedly figured this out quite a long time ago and hasn't shared. I figured my method out ~11 years ago, and I have no intentions on giving it up, either.

and let me guess, you can manage to yield about 5% of the available resin on the starting material with your method, that's not that hard with 10 gentle taps on the frame with small amounts of quality trim at a time and then resift it...but what about the other 95% of the resin?, I guess you'll have to buy a tumbler from Bubbleman to get that or do you have a set of Bubblebags already?

You can read, yes? Did you read my other posts i've made? I yield roughly a gram per ~30-45 seconds, of CLEAR DOME full melt. Here, again.. this is the uncropped shot, just so I am not accused of pulling a photoshop for the show.



It's not gentle taps on the screen, doofy. If you think i'm getting a gram+ per of full clear melt, and then a 2nd grade that melts, in almost equal quantity.. by tapping it gently.. then please stop talking. Because you're -way- off.

I already explained I do not re-sift. I could make what you see right there better if I wanted. Why? All you're doing is risking losing a bunch in the screen or them getting stuck from you carding it through. I'm perfectly happy with that quality and I see no reason to change what i'm doing when i'm literally able to make that in less than a minute. Know what that works out to over a couple hours? Oh yeah. I use roughly 2 normal size handfuls of good material, nothing huge. Tumble machine, lol, smoke some more of that dirty sift, kid.

I don't know why you are hating on him and everyone else, there are many people here who prefer to use dry sifting methods to remove 100% of resin on the material, not just a small percentage of it...some of us do both and if you actually checked out the specs of the Bubbleman Tumble Now tumbler you would see that you could do both

Are you comparing 'removing the resin from the plant' to 'getting the resin 100% pure'? You realize those are two entirely different fucking things, right? Jesus christ. What are you, like 14? I could strip the entire plant with fucking acetone and say I removed 100% of the resin you dip.

run it for a few minutes and then use the 70 micron flat screen on the drawer under the mesh cylinder to resift and purify that first run.

Ohh, I get it.. that 70 micron screen is going to catch every strain, right? Indica, Sativa, hybrids.. something out of a private seed stock from 20+ years ago that is almost pure Indica? It'll catch those, right? Because there's no way different plants could grow differently.

Then you could start up the cylinder again and run it for 10~20 minutes to strip most of the resin off the material...the first run of dry sift will yield very clean resin that will zing your brain and the second run will press under pressure to form commercial quality hash.

You're a fucking moron. Stop talking.

 

[DrySiftWizard]

Sam's method as we seen via Biubbleman's photos will produce very pure dry sift, but the yield is extremely low (10 grams of resin per kilo of starting material...or about 10% of the resin on the material)...I'd be a lot more interested in taking that method and modifying & innovating it so it can produce very clean dry resin as well as separate all the resin from the plant material....now that would be a wonderful thing....using some "secret" method to get 0.3 of a gram of pure dry sift per ounce is a lot less interesting for me, but hey, each to his own. If I had boxes full of trim given to me then I'd probably change me tune...but I'd reckon most of us here don't have buckets and buckets full of trim to play with and are interested in a combination of purity and yield, not one or the other.

Newsflash, dipshit.. i've mentioned that I don't use buds, and only use trim and very airy/light buds that have no density to them.

I don't know where the hell you are getting the #'s you're spewing out of your mouth, but please stop it, you're embarrassing yourself.

 

[DrySiftWizard]

Hell.. I posted this on FMB as well.. what, almost 2 years ago? Can't remember.. anyways, I made this using trim that had only been drying for like 3 days.. haha. It was still semi wet and I just had to make a taster batch.. so I did.



It should have been far cleaner but again, I was impatient and just did it. That thread is still over there far as I know.

Even this is more impressive than the crap the box is putting out.

 

[Chamba]

Wiz, what is the point of you being here? you have nothing to offer apart being an obnoxious wanker who won't share his method.

 

[DrySiftWizard]

Wiz, what is the point of you being here? you have nothing to offer apart being an obnoxious wanker who won't share his method.

I already gave the other guy options..

$99.95 (USD) and i'll tell ya.

Or, you show me where Sam shared his method, and i'll give up mine.

Why are you here? To give out bad advice along with GS and not have shit to back it up with?

Do you have any shots you could provide us of your dry sift? Why would anyone want you around 'contributing' if you're only spreading bad/wrong knowledge?

Isn't this site about helping people, eh?

 

[Chamba]

Newsflash, dipshit..

lol, that post was not about you.

anyway, nice pics, too bad you can't share how it's done.....

 

[Chamba]

here's a question for you that you might be able to answer without cherry picking parts of it that suit you and without shooting off on another rant

What percentage of the resin on the trim can you separate to a high purity with your method? Is it similar to Sam's and you can only separate a small percentage or can you remove most of it with your method?

 

[Chamba]

Why are you here? To give out bad advice along with GS and not have shit to back it up with?

Muck of what GS, I and others write about here is based on experience and is very similar to what is contained in parts of R.C. Clarke's book "Hashish!" (a book I picked up just a few years ago)....I guess he's a dipshit too eh?

 

[DrySiftWizard]

Why are you here? To give out bad advice along with GS and not have shit to back it up with?

Muck of what GS, I and others write about here is based on experience and is very similar to what is contained in parts of R.C. Clarke's book "Hashish!" (a book I picked up just a few years ago)....I guess he's a dipshit too eh?

Does he tell you how to make FMCD dry sift?

If not, then he wrote a book about shit everyone already knows how to do.

As for my method, I usually run it twice to 3x and then either bubble it or oil it, depending on the mood i'm in.

Imagine a standard grocery bag.. paper one.. half that bag full of good trim.. I can pull you roughly a half zip of clear dome and another half of stuff almost as good.

The 'B' cleans up decent, but never as good as the first sift, as again like i've said.. the minute you start resifting you're breaking up fragments.