Yayyy! My first colloidal silver generator (photo)

[Buddaluva]

humm that is just wacky lol

That is the only branch with pods on them ,

Its an auto jack from freedom of seeds and iv been spraying 1 branch only ( which worked btw ) but the branch with the pods ( well male sacs ) i did not spray

So can a single branch on a plant hermi and not the rest of the plant ?

The branch iv been spraying has changed and has little male sacs on it but their not mature yet and no where near opening

Iv been using fem pollen from an auto snowryder i sprayed on the auto jack so thats why i thought those pods might end up being seed pods

Damn this is just crazy

Well since that one branch hermied on me should i stop spraying the branch i have been and just use the hermi pollen off that single branch ?

EDIT

Here is a short vid i did so yall could get a visual of whats going on

http://www.youtube.com/watch?v=UJSGMM-xKMM

 

[jackel]

It's either over spray, or it's an unstable plant.

 

[PhenoMenal]

If you want to see how this silver promotes health. Search (Dr. Bob Beck) Eye opener.

http://en.wikipedia.org/wiki/Argyria

Whether colloidal silver is beneficial for humans, it seems the jury is still out, but what IS a fact is that if a human ingests TOO MUCH silver they'll develop a condition called Argyria, which makes their skin turn blue, and apparently is irreversible. It's not the best look ... ...

src: http://mofo-forums.984659.n3.nabble.com/Argyria-td2302338.html

 

[StayBlazinDawg]

They do Gold and Silver injections for Lyme disease, I just make it and guzzle and you can see the silver ions floating after we make it. The medical community tends to use it for burn victims and other uses, but just don't tell cause it is fast cheap easy and works. Gold is up next baby.

 

[Buddaluva]

Yippee

Thanks Pheno for this thread

My auto jack is finally showing seed formation

I sprayed the c.s on my fem auto snowryder and used the little bit of pollen i got and put it on my auto jack and finally the seeds are starting to form

Auto Snowryder x Jack Auto - im gonna call the new beans Jack frost

Their is not gonna be a lot of beans but its enough to work with

Gonna let them mature for about 3 1/2 to 4 weeks then pick them after i see the alligator stripes on them

 

[Javadog]

Eureka! Good work.

 

[jackel]

My fem project yielded 10 viable seeds haha. Got them begging right now. So I know how it feels.
P.s. there is a Jack Frost strain

 

[Javadog]

I suppose that it makes sense...with "frost" in the name. :0)

 

[Buddaluva]

P.s. there is a Jack Frost strain

Awe damn for real

Gotta think of something else now

edit

No jack frost auto though , but still the name is their ugh

 

[Buddaluva]

I need some help plz fellas

I wired up a 12v adapter with the alligator clips and its been working ( leaching the silver off and all ) but for some reason i cannot get my ppm higher then 22ppm

It starts off good , you see the bubbles forming on the silver swelling up and all but once it gets to around 22ppm it stays ( the silver continues to leach off but the ppm is not getting any higher though )

Its been 3 days and the ppm is still at 22 but the silver is still leaching off so i dont understand why the ppm is not going up also

Any thoughts on this is greatly appreciated

Do any of you check your ppm when your making up your solution or do you just let it sit for so long then just go with it ? ( just asking in case i can get by with 22ppm and still reverse my girls )

Thanks in advance fellas

 

[jump117]

for some reason i cannot get my ppm higher then 22ppm

Its been 3 days and the ppm is still at 22 but the silver is still leaching off so i dont understand why the ppm is not going up also

Any thoughts on this is greatly appreciated

Do any of you check your ppm when your making up your solution or do you just let it sit for so long then just go with it ?

The concentration of ions does not grow linearly, it is itself fading process.

Together with the increasing concentration of ions increases the conductivity of the solution,
and increasing electrical forces acting on a metal begin to detach from the anode large particles of silver.

If you leave the process unattended for a few days, the concentration of ions will not grow,
but will only increase the amount of metallic silver precipitated on the bottom and the electrodes in the form of black powder.

 

[Loose Cannon]

Thanks for all this great info.
Just began my first colloidal water and will begin spraying a Platinum GSC for pollen tomorrow.
Will then be using the fem-pollen on my C99 tested @ 21.5 and a fem Critical Jack that's yet to be tested but should be a 20+ plant.
In 10 weeks or so I'll be popping some interesting fem hybrids.
I'll post on this thread as things progress.
Thanks again Pheno and all who've added as well.

 

[Javadog]

Hey,

Can someone point me back to the posts that discussed PPMs plateauing?

I am sure that this has come up before....

Well, anyway, it seems that after I get to about 20 PPM I keep losing silver but
do not see an appreciable in PPM.

Take care,

JD

 

[2 Legal Co]

I need some help plz fellas

I wired up a 12v adapter with the alligator clips and its been working ( leaching the silver off and all ) but for some reason i cannot get my ppm higher then 22ppm

It starts off good , you see the bubbles forming on the silver swelling up and all but once it gets to around 22ppm it stays ( the silver continues to leach off but the ppm is not getting any higher though )

Its been 3 days and the ppm is still at 22 but the silver is still leaching off so i dont understand why the ppm is not going up also

Any thoughts on this is greatly appreciated

Do any of you check your ppm when your making up your solution or do you just let it sit for so long then just go with it ? ( just asking in case i can get by with 22ppm and still reverse my girls )

Thanks in advance fellas

That's because one side is leaching,,, while the other is being plated/gaining.

This is the process used for electroplating,,,, in this case silver plating.

 

[doneit]

This is a white i having been working on for 43 days.
She has dropped some sacks, the buds are loaded with sacks also...

BUT NO POLLEN?

Should i keep going with this girl, or should i toss it and try again?

I thought i did everything perfect? guess not..

Any help is appreciated gang!

 

[bajangreen]

doneit the anthers look dry and should be releasing pollen did you try to open them manually? Also did you start to spray this plant before the flip?

 

[doneit]

Baja, I started spraying on day one of flip, I have checked a couple fat ones, there seems to be no pollen?

 

[High Country]

That's because one side is leaching,,, while the other is being plated/gaining.

This is the process used for electroplating,,,, in this case silver plating.

Just cook it for a day, that's all I did but used a commercial CS generator. I never checked PPM. Just cooked it up and got into it.

Like freaking cloning....don't turn it into rocket science....cos it is not.

 

[bajangreen]

doneit i think you need a next week and you should see some pollen by then. they look like they should be bursting open any moment now, let us know when you see some pollen.

Is that from cut or seed? what strain is it?

 

[Javadog]

I got balls.

Check it....the bud with zero anthers:

Here is a close-up:

Thanks all!

JD