Here's what I've been working on for a while now. I've been working on a shoe string budget, so I don't have all the fancy stuff yet, but this will get me going.
The flower room below is 4' wide and 6' long, it soon will have the floors painted white and the end of the reflectors covered with mylar. The whole end wall is easily removable for access.
Here is a shot from the other end of the tunnel. The square hole in the floor is the main access door (2'x2'). Eventually there will be some enclosed veg areas in the back corners.
Here is the window unit a/c and heater. Below it is the mailbox that will contain the ballasts. (barely) There will eventually be a 6" hole in the wall at the top which will re-circulate air being pulled from the far end of the reflector.
A picture from the other side of the access hatch looking into the tunnel.
Here is what it looks like from the outside. I have the insulation to cover it and will soon be covered. The back part is covered with r-30 insulation already as you can see in the distance. This thing barely fits in the attic, an inch of clearance. I've also decided to make that 4" hole a 6" hole to make sure I have enough airflow through the tunnel.
I just had to tell someone about this thing, I'm glad I have a place like this to come to. My gf thinks I sure do spend a lot of time on the internet.
I have 2 large KC 36's being transplanted now and will have them scrogged out in there under one light and flowered. Finances only permit one light for now, but next round will have all 1200 watts cranked up. They are being transplanted into an all perlite hempy trough (under the bed storage tote) and scrogged out onto a 2'x3'10" screen. Dutchmaster Advanced Grow and Bloom with potash+ and also some cal/mag for nutes. Expect a grow log in the hydro section in a few days.
edit;its in the grow diary section, link to it is a few posts down
I will have periodic updates when significant changes are made to the grow room.
The flower room below is 4' wide and 6' long, it soon will have the floors painted white and the end of the reflectors covered with mylar. The whole end wall is easily removable for access.
Here is a shot from the other end of the tunnel. The square hole in the floor is the main access door (2'x2'). Eventually there will be some enclosed veg areas in the back corners.
Here is the window unit a/c and heater. Below it is the mailbox that will contain the ballasts. (barely) There will eventually be a 6" hole in the wall at the top which will re-circulate air being pulled from the far end of the reflector.
A picture from the other side of the access hatch looking into the tunnel.
Here is what it looks like from the outside. I have the insulation to cover it and will soon be covered. The back part is covered with r-30 insulation already as you can see in the distance. This thing barely fits in the attic, an inch of clearance. I've also decided to make that 4" hole a 6" hole to make sure I have enough airflow through the tunnel.
I just had to tell someone about this thing, I'm glad I have a place like this to come to. My gf thinks I sure do spend a lot of time on the internet.
I have 2 large KC 36's being transplanted now and will have them scrogged out in there under one light and flowered. Finances only permit one light for now, but next round will have all 1200 watts cranked up. They are being transplanted into an all perlite hempy trough (under the bed storage tote) and scrogged out onto a 2'x3'10" screen. Dutchmaster Advanced Grow and Bloom with potash+ and also some cal/mag for nutes. Expect a grow log in the hydro section in a few days.
edit;its in the grow diary section, link to it is a few posts down
I will have periodic updates when significant changes are made to the grow room.
You're going to love the crystal production of those CMH bulbs!
....What do you think it can pull for a yield?
